Home › Engine / Hybrid System › 2KD-FTV ENGINE CONTROL › ECD SYSTEM(for DPF) › from 2012.04
RM1840EF _51 Engine / Hybrid System _009568 2KD-FTV ENGINE CONTROL _0052068 ECD SYSTEM(for DPF) J

2KD-FTV ENGINE CONTROL  ECD SYSTEM(for DPF)  After Treatment Control System  


PROCEDURE

1.TAKE SNAPSHOT DURING IDLING AND 4000 RPM (PROCEDURE 1)
a.

Connect the intelligent tester to the DLC3.


b.

Start the engine and turn the tester on.


c.

Enter the following menus: Powertrain / Engine and ECT / Data List / All Data.


d.
A176220
2.528,2.459 2.751,2.645 0.223,0.186 10 *1 2.068,2.748 2.352,2.542 false 2.352,2.542 2.465,2.542 false 0.13,0.104 0.353,0.29 0.223,0.186 10 *a
*1 Snapshot Button
*a Reference


Take a snapshot of the following Data List items.

HINT:
·

A snapshot can be used to compare vehicle data from the time of the malfunction to normal data and is very useful for troubleshooting. The data in the list below is that of a normal vehicle, but as the data varies between individual vehicles, this data should only be used for reference.

·

Graphs like the ones shown below can be displayed by transferring the stored snapshot data from the tester to a PC (Personal Computer). Intelligent Viewer must be installed on the PC.

·

Check the Data List at idling and at 4000 rpm with no load after the engine is warmed up.




Result:
Proceed to
NEXT



NEXT

2.READ VALUE USING INTELLIGENT TESTER (CATALYST DIFFERENTIAL PRESS)
2.READ VALUE USING INTELLIGENT TESTER (CATALYST DIFFERENTIAL PRESS)
a.

Check Catalyst Differential Press in the snapshot taken in procedure 1 when the engine was running at 4000 rpm with no load.

Result:
Result Proceed to
Catalyst Differential Press is more than 0.45 A
Except above B




A

3.REPLACE FRONT EXHAUST PIPE ASSEMBLY

B

END

3.REPLACE FRONT EXHAUST PIPE ASSEMBLY
a.

Replace the front exhaust pipe assembly.

Click hereEngine / Hybrid System>2KD-FTV INTAKE / EXHAUST>EXHAUST PIPE(w/ DPF)>REMOVAL


Result:
Proceed to
NEXT



NEXT

4.CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
4.CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
Result:
Proceed to
NEXT



NEXT

END