Home › Engine / Hybrid System › 1KD-FTV ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR
RM1840EF _51 Engine / Hybrid System _009570 1KD-FTV ENGINE CONTROL _0052094 ENGINE COOLANT TEMPERATURE SENSOR A

1KD-FTV ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR

a.

Install a new gasket to the engine coolant temperature sensor.


b.

Install the engine coolant temperature sensor.

Torque:
20 N*m (200 kgf*cm, 14 ft.*lbf)


c.

Connect the engine coolant temperature sensor connector.