Home › Engine / Hybrid System › 1KD-FTV ENGINE CONTROL › INTAKE AIR TEMPERATURE SENSOR(w/o Glow Plug Controller)
RM1840EF _51 Engine / Hybrid System _009570 1KD-FTV ENGINE CONTROL _0052100 INTAKE AIR TEMPERATURE SENSOR(w/o Glow Plug Controller) A

1KD-FTV ENGINE CONTROL  INTAKE AIR TEMPERATURE SENSOR(w/o Glow Plug Controller)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL INTAKE AIR TEMPERATURE SENSOR

a.

Using a 22 mm deep socket wrench, install a new gasket and the intake air temperature sensor.

Torque:
29 N*m (300 kgf*cm, 22 ft.*lbf)


b.

Connect the intake air temperature sensor connector.