Home › Engine / Hybrid System › 1KD-FTV INTAKE / EXHAUST › INTERCOOLER(w/o Glow Plug Controller)
RM1840EF _51 Engine / Hybrid System _009588 1KD-FTV INTAKE / EXHAUST _0052326 INTERCOOLER(w/o Glow Plug Controller) A

1KD-FTV INTAKE / EXHAUST  INTERCOOLER(w/o Glow Plug Controller)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL INTERCOOLER ASSEMBLY

a.

Install a new gasket and the intake air connector with the 4 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

w/ EGR Cooler:

Install the intercooler with the 4 bolts.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


c.
A301830
1.063,0.24 1.292,0.479 0.229,0.24 10 false B 2.167,0.49 2.396,0.729 0.229,0.24 10 false B 0.198,0.948 0.427,1.188 0.229,0.24 10 false B 1.094,1.771 1.25,1.969 0.156,0.198 10 false A

w/o EGR Cooler:

Install the intercooler with the 4 bolts.

Torque:
for bolt A : 32 N*m (326 kgf*cm, 24 ft.*lbf)
for bolt B : 12 N*m (122 kgf*cm, 9 ft.*lbf)


d.

Install a new No. 2 air hose and then tighten the 2 hose clamps.

Torque:
6.5 N*m (66 kgf*cm, 58 in.*lbf)


e.

Tighten the 2 hose clamps of the No. 1 air hose.

Torque:
6.5 N*m (66 kgf*cm, 58 in.*lbf)


Hide 4.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

a.

Install the engine cover with the 3 bolts and 2 cap nuts.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)