Home › Engine / Hybrid System › 1KD-FTV ENGINE CONTROL › ECD SYSTEM(for i-ART) › 2012.04–2012.10
RM1840EF _51 Engine / Hybrid System _009570 1KD-FTV ENGINE CONTROL _0052110 ECD SYSTEM(for i-ART) C

1KD-FTV ENGINE CONTROL  ECD SYSTEM(for i-ART)  P0201  Injector Circuit / Open - (Cylinder 1)  P0202  Injector Circuit / Open - (Cylinder 2)  P0203  Injector Circuit / Open - (Cylinder 3)  P0204  Injector Circuit / Open - (Cylinder 4)  P062D  No. 1 Fuel Injector Driver Circuit Performance  


DESCRIPTION

The injector driver (EDU) delivers drive signals to the injector assembly using the DC/DC converter, which provides a high-voltage and quick-charging system.

Soon after the injector driver (EDU) receives an injection command (#1 to #4) signal from the ECM, the injector driver (EDU) responds to the command with an injector injection confirmation (INJF) signal when the current is applied to the injector.

A210270E28
1.156,5.615 1.542,5.854 0.385,0.24 2.583,5.667 2.969,5.906 0.385,0.24 4.26,5.875 4.646,6.115 0.385,0.24 5.698,5.969 6.083,6.208 0.385,0.24 3.396,0.177 3.729,0.344 0.333,0.167 10 false EDU 2.563,1.469 3.229,1.865 0.667,0.396 10 false DC/DC Converter 0.313,1.438 1.146,1.615 0.833,0.177 10 false from Battery 0.313,2.208 1.406,2.385 1.094,0.177 10 false Command Pulse 0.885,5.167 2.104,5.344 1.219,0.177 10 false Confirmation Pulse 0.083,5.354 1.125,5.729 1.042,0.375 10 false Injector Driver (EDU) Connector 0.281,0.063 1.688,0.24 1.406,0.177 10 false EDU Wiring Diagram 0.656,3.625 0.99,3.792 0.333,0.167 10 false ECM 1.5,2.521 1.781,2.688 0.281,0.167 10 false IJt1 1.51,2.792 1.781,2.958 0.271,0.167 10 false IJt4 1.51,3.094 1.781,3.26 0.271,0.167 10 false IJt2 1.51,3.396 1.781,3.563 0.271,0.167 10 false IJt3 1.552,4.01 1.75,4.177 0.198,0.167 10 false IJf 1.51,4.625 1.802,4.792 0.292,0.167 10 false IJen 1.479,3.708 1.802,3.875 0.323,0.167 10 false IJt-R 1.479,4.313 1.802,4.479 0.323,0.167 10 false IJf-R 5,2.458 5.354,2.625 0.354,0.167 10 false INJ-1 5,0.573 5.427,0.74 0.427,0.167 10 false INJ+R 5,0.896 5.396,1.063 0.396,0.167 10 false INJ+3 5,1.208 5.396,1.375 0.396,0.167 10 false INJ+2 5,1.531 5.396,1.698 0.396,0.167 10 false INJ+4 5,1.854 5.396,2.021 0.396,0.167 10 false INJ+1 5,2.792 5.354,2.958 0.354,0.167 10 false INJ-4 5,3.094 5.354,3.26 0.354,0.167 10 false INJ-2 5,3.417 5.354,3.583 0.354,0.167 10 false INJ-3 5,3.74 5.385,3.906 0.385,0.167 10 false INJ-R 3.229,3.25 3.698,3.583 0.469,0.333 10 false Control Circuit 3.563,5.417 3.906,5.583 0.344,0.167 10 false GND 1.604,7.125 5.052,7.49 3.448,0.365 10 false CAUTION: Terminals K, L, M, N, O, P, Q, R, S and T are high voltage terminals. 1.188,5.667 1.563,5.875 0.375,0.208 10 false C107 2.615,5.719 2.99,5.927 0.375,0.208 10 false C108 4.292,5.927 4.667,6.135 0.375,0.208 10 false C109 5.719,6.021 6.094,6.229 0.375,0.208 10 false C110

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory
P0201 Injector Circuit / Open - (Cylinder 1) Open or short in injector circuit occurs a certain number of times (a maximum of approx. 0.5 seconds).
(1 trip detection logic)
·

Open or short in injector driver circuit

·

Injector assembly

·

Injector driver

·

ECM


Comes on DTC stored
P0202 Injector Circuit / Open - (Cylinder 2) Open or short in injector circuit occurs a certain number of times (a maximum of approx. 0.5 seconds).
(1 trip detection logic)
·

Open or short in injector driver circuit

·

Injector assembly

·

Injector driver

·

ECM


Comes on DTC stored
P0203 Injector Circuit / Open - (Cylinder 3) Open or short in injector circuit occurs a certain number of times (a maximum of approx. 0.5 seconds).
(1 trip detection logic)
·

Open or short in injector driver circuit

·

Injector assembly

·

Injector driver

·

ECM


Comes on DTC stored
P0204 Injector Circuit / Open - (Cylinder 4) Open or short in injector circuit occurs a certain number of times (a maximum of approx. 0.5 seconds).
(1 trip detection logic)
·

Open or short in injector driver circuit

·

Injector assembly

·

Injector driver

·

ECM


Comes on DTC stored
P062D No. 1 Fuel Injector Driver Circuit Performance Inconsistency in the injection waveforms between the injector driver and ECM while the engine is running a certain number of times (a maximum of approx. 0.5 seconds).
(1 trip detection logic)
·

Open or short in injector driver circuit

·

Injector assembly

·

Injector driver

·

ECM


Comes on DTC stored

CONFIRMATION DRIVING PATTERN

P0201, P0202, P0203, P0204, P062D
DTC Detection Drive Pattern Idling for 5 seconds

MONITOR DESCRIPTION

P0201, P0202, P0203, P0204:

The ECM compares injection command (#1 to #4) signals and injection confirmation (INJF) signals for each cylinder. If the ECM determines that a cylinder has a malfunction, DTC P0201, P0202, P0203 or P0204 will be stored.


P062D:

The ECM continuously monitors both injection command (#1 to #4) signals and injection confirmation (INJF) signals. This DTC will be stored if the ECM determines that the number of #1 to #4 signals and INJF signals are inconsistent.

The fuel injectors are grounded over a Field Effect Transistor (FET) and a serial resistor. This resistor creates a voltage drop, which is monitored by the injector driver (EDU) (injector drive circuit) in relation to the current drawn by the injector assembly. When the injector current becomes too high, the voltage drop over the resistor exceeds a specified level and no INJF signal for that cylinder is sent to the ECM.

After the engine is started, when there is no injection confirmation (INJF) signal from the injector driver (EDU) to the ECM even though the ECM sends injection command (#1 to #4) signals to the injector driver (EDU), DTC P062D is stored.

If this DTC is stored, the ECM enters fail-safe mode and limits engine power or stops the engine. The fail-safe mode continues until the ignition switch is turned off.

A145849E15
4.958,2.521 4.625,2.875 false 4.625,3.25 4.833,3.583 false 0.115,0.042 1.698,0.25 1.583,0.208 10 false Malfunction Detection: 2.604,0.656 3.01,0.854 0.406,0.198 10 false ECM 0.177,1.76 1.865,1.979 1.688,0.219 10 false Injection Command Signal 0.115,3.031 2.073,3.24 1.958,0.208 10 false Injection Confirmation Signal 1.875,2.01 2.531,2.219 0.656,0.208 10 false #1 to #4 2.104,2.792 2.583,3.021 0.479,0.229 10 false INJF 3.313,1.813 3.656,2.01 0.344,0.198 10 false ON 3.646,0.479 5.448,0.74 1.802,0.26 10 false Command Signal (#1 to #4) 3.625,1.104 5.354,1.375 1.729,0.271 10 false Confirmation Signal (INJF) 5.875,0.667 6.26,0.865 0.385,0.198 10 false EDU 3.708,2.156 4.073,2.354 0.365,0.198 10 false OFF 5.01,2.385 5.781,2.583 0.771,0.198 10 false Abnormal 4.885,3.531 5.469,3.729 0.583,0.198 10 false Normal


WIRING DIAGRAM

A279707E04
6.458,8.302 6.813,8.479 0.354,0.177 10 false ECM 2.906,1.323 3.26,1.5 0.354,0.177 10 false EDU 4.031,3.25 4.594,3.438 0.563,0.188 10 false MAIN 0.302,8.323 1.198,8.5 0.896,0.177 10 false Injector Driver 2.354,5.031 2.896,5.219 0.542,0.188 10 false Battery 1.385,4.458 2,4.646 0.615,0.188 10 false BATT P/I 2.594,3.656 2.938,3.854 0.344,0.198 10 false EFI 2.542,0.823 2.74,1 0.198,0.177 10 false 1J 1.99,0.823 2.188,1 0.198,0.177 10 false 1J 1.771,0.844 1.938,1.042 0.167,0.198 10 false 8 2.833,0.823 3,1.021 0.167,0.198 10 false 7 4.438,2.354 4.635,2.531 0.198,0.177 10 false 1J 4.438,2.781 4.635,2.958 0.198,0.177 10 false 1J 4.438,3.813 4.635,3.99 0.198,0.177 10 false 1J 3.677,4.042 3.875,4.219 0.198,0.177 10 false 1J 1.979,4.042 2.219,4.219 0.24,0.177 10 false 1H 2.219,4.229 3.781,4.594 1.563,0.365 10 false No. 1 Integration Relay 1.25,0.458 1.615,0.635 0.365,0.177 10 false C107 5.76,0.448 6.167,0.625 0.406,0.177 10 false C156 5.75,2.781 6.125,2.958 0.375,0.177 10 false G156 5.75,3.802 6.167,3.979 0.417,0.177 10 false G157 5.75,2.344 6.177,2.521 0.427,0.177 10 false G157 4.479,2.188 4.635,2.365 0.156,0.177 10 false 4 4.479,2.594 4.635,2.771 0.156,0.177 10 false 2 4.479,3.625 4.635,3.802 0.156,0.177 10 false 1 5.854,3.604 6.26,3.823 0.406,0.219 10 false 23 5.865,2.583 6.104,2.781 0.24,0.198 10 false 11 5.865,2.146 6.104,2.344 0.24,0.198 10 false 24 5.844,0.24 6.083,0.438 0.24,0.198 10 false 12 1.385,0.26 1.542,0.438 0.156,0.177 10 false 2 1.781,4.01 1.938,4.188 0.156,0.177 10 false 1 3.948,4.031 4.104,4.208 0.156,0.177 10 false 3 6.208,2.344 6.469,2.5 0.26,0.156 10 false +B 0.958,0.458 1.219,0.615 0.26,0.156 10 false +B 4.854,1.26 5.552,1.417 0.698,0.156 10 false EFI NO. 2 6.198,0.438 6.573,0.615 0.375,0.177 10 false IREL 6.208,2.76 6.698,2.948 0.49,0.188 10 false MREL 6.198,3.792 6.656,3.958 0.458,0.167 10 false BATT 4.427,1.896 4.625,2.073 0.198,0.177 10 false 1J 5.75,1.885 6.156,2.063 0.406,0.177 10 false G157 4.479,1.719 4.635,1.896 0.156,0.177 10 false 5 5.844,1.677 6.083,1.875 0.24,0.198 10 false 17 6.208,1.865 6.552,2.021 0.344,0.156 10 false +B2 5.75,5.76 6.167,5.938 0.417,0.177 10 false C166 5.844,5.563 6.083,5.76 0.24,0.198 10 false 20 6.188,5.74 6.646,5.906 0.458,0.167 10 false INJF 5.76,4.854 6.177,5.031 0.417,0.177 10 false C164 5.896,4.656 6.135,4.854 0.24,0.198 10 false 6 6.188,4.823 6.646,4.99 0.458,0.167 10 false E1 5.75,6.302 6.167,6.479 0.417,0.177 10 false C166 5.854,6.094 6.094,6.292 0.24,0.198 10 false 21 6.198,6.281 6.656,6.448 0.458,0.167 10 false #1 5.75,6.865 6.167,7.042 0.417,0.177 10 false C166 5.854,6.646 6.094,6.844 0.24,0.198 10 false 22 6.198,6.833 6.656,7 0.458,0.167 10 false #2 5.75,7.375 6.167,7.552 0.417,0.177 10 false C166 5.854,7.177 6.156,7.375 0.302,0.198 10 false 23 6.198,7.354 6.656,7.521 0.458,0.167 10 false #3 5.76,7.927 6.177,8.104 0.417,0.177 10 false C166 5.854,7.729 6.094,7.927 0.24,0.198 10 false 24 6.198,7.896 6.656,8.063 0.458,0.167 10 false #4 2.177,2.677 2.573,2.865 0.396,0.188 10 false EDU 2.802,3.938 3.031,4.094 0.229,0.156 10 false 2 2.49,3.938 2.75,4.135 0.26,0.198 10 false 1 1.885,2.51 2.135,2.708 0.25,0.198 10 false 2 1.875,2.781 2.156,3 0.281,0.219 10 false 1 1.24,5.76 1.604,5.938 0.365,0.177 10 false C109 1.365,5.563 1.521,5.74 0.156,0.177 10 false 8 0.854,5.75 1.229,5.906 0.375,0.156 10 false INJF 1.24,6.292 1.604,6.469 0.365,0.177 10 false C109 1.365,6.115 1.521,6.292 0.156,0.177 10 false 7 0.885,6.292 1.26,6.448 0.375,0.156 10 false #10 1.229,6.854 1.594,7.031 0.365,0.177 10 false C109 1.365,6.656 1.521,6.833 0.156,0.177 10 false 3 0.885,6.844 1.26,7 0.375,0.156 10 false #20 1.24,7.385 1.604,7.563 0.365,0.177 10 false C109 1.354,7.188 1.51,7.365 0.156,0.177 10 false 6 0.885,7.365 1.26,7.521 0.375,0.156 10 false #30 1.24,7.927 1.604,8.104 0.365,0.177 10 false C109 0.896,7.906 1.271,8.063 0.375,0.156 10 false #40 1.354,7.729 1.51,7.906 0.156,0.177 10 false 4 4.438,1.417 4.635,1.594 0.198,0.177 10 false 1J 4.469,1.24 4.688,1.448 0.219,0.208 10 false 6 5.021,1.542 5.177,1.719 0.156,0.177 10 false 2 5.26,1.542 5.417,1.719 0.156,0.177 10 false 1

A279708
6.354,9.333 6.729,9.479 0.375,0.146 10 false ECM 0.177,9.354 1.146,9.635 0.969,0.281 10 false Injector Driver 3.313,1.813 3.615,1.958 0.302,0.146 10 false #10 3.313,0.948 3.542,1.094 0.229,0.146 10 false #1 1.469,9.177 2.229,9.333 0.76,0.156 10 false *: Shielded 2.313,2.042 2.469,2.177 0.156,0.135 10 false * 2.313,4.052 2.469,4.188 0.156,0.135 10 false * 2.313,6.052 2.469,6.188 0.156,0.135 10 false * 2.313,8.083 2.469,8.219 0.156,0.135 10 false * 4.802,2.042 4.958,2.177 0.156,0.135 10 false * 4.802,4.052 4.958,4.188 0.156,0.135 10 false * 4.802,6.052 4.958,6.188 0.156,0.135 10 false * 4.802,8.083 4.958,8.219 0.156,0.135 10 false * 5.677,0.958 6.073,1.104 0.396,0.146 10 false C166 4.313,0.875 4.438,1.021 0.125,0.146 10 false 2 4.313,1.302 4.438,1.448 0.125,0.146 10 false 1 4.313,1.74 4.438,1.885 0.125,0.146 10 false 4 3.094,0.875 3.219,1.021 0.125,0.146 10 false 3 3.094,1.302 3.219,1.448 0.125,0.146 10 false 5 3.094,1.729 3.219,1.875 0.125,0.146 10 false 6 3.917,0.958 4.25,1.104 0.333,0.146 10 false VIJ1 3.917,1.385 4.25,1.531 0.333,0.146 10 false EIJ1 3.917,1.813 4.25,1.958 0.333,0.146 10 false PIJ1 6.115,0.979 6.448,1.125 0.333,0.146 10 false VIJ1 6.115,1.396 6.448,1.542 0.333,0.146 10 false EIJ1 6.115,1.823 6.448,1.969 0.333,0.146 10 false PIJ1 3.313,1.375 3.688,1.521 0.375,0.146 10 false CINJ 3.208,2.073 3.604,2.219 0.396,0.146 10 false C159 3.208,2.219 4.438,2.448 1.229,0.229 10 false No. 1 Fuel Injector 3.313,2.969 3.615,3.115 0.302,0.146 10 false #40 3.313,3.823 3.542,3.969 0.229,0.146 10 false #4 4.313,2.885 4.438,3.031 0.125,0.146 10 false 2 4.313,3.313 4.438,3.458 0.125,0.146 10 false 1 4.313,3.75 4.438,3.896 0.125,0.146 10 false 4 3.094,3.74 3.219,3.885 0.125,0.146 10 false 3 3.094,3.313 3.219,3.458 0.125,0.146 10 false 5 3.094,2.885 3.219,3.031 0.125,0.146 10 false 6 3.917,2.979 4.25,3.125 0.333,0.146 10 false VIJ4 3.917,3.396 4.25,3.542 0.333,0.146 10 false EIJ4 3.917,3.823 4.25,3.969 0.333,0.146 10 false PIJ4 6.115,2.99 6.448,3.135 0.333,0.146 10 false VIJ4 6.115,3.427 6.448,3.573 0.333,0.146 10 false EIJ4 6.115,3.854 6.448,4 0.333,0.146 10 false PIJ4 3.313,3.385 3.688,3.531 0.375,0.146 10 false CIJ4 3.208,4.083 3.604,4.229 0.396,0.146 10 false C162 3.208,4.229 4.438,4.469 1.229,0.24 10 false No. 4 Fuel Injector 3.313,5.833 3.615,5.979 0.302,0.146 10 false #20 3.313,4.979 3.542,5.125 0.229,0.146 10 false #2 4.313,4.885 4.438,5.031 0.125,0.146 10 false 2 4.313,5.313 4.438,5.458 0.125,0.146 10 false 1 4.313,5.75 4.438,5.896 0.125,0.146 10 false 4 3.094,4.885 3.219,5.031 0.125,0.146 10 false 3 3.094,5.313 3.219,5.458 0.125,0.146 10 false 5 3.094,5.74 3.219,5.885 0.125,0.146 10 false 6 3.917,4.99 4.25,5.135 0.333,0.146 10 false VIJ2 3.917,5.396 4.25,5.542 0.333,0.146 10 false EIJ2 3.917,5.823 4.25,5.969 0.333,0.146 10 false PIJ2 6.115,4.969 6.448,5.115 0.333,0.146 10 false VIJ2 6.115,5.396 6.448,5.542 0.333,0.146 10 false EIJ2 6.115,5.823 6.448,5.969 0.333,0.146 10 false PIJ2 3.313,5.385 3.688,5.531 0.375,0.146 10 false CIJ2 3.208,6.083 3.604,6.229 0.396,0.146 10 false C160 3.208,6.229 4.458,6.469 1.25,0.24 10 false No. 2 Fuel Injector 3.313,6.969 3.615,7.115 0.302,0.146 10 false #30 3.313,7.844 3.542,7.99 0.229,0.146 10 false #3 4.313,6.896 4.438,7.042 0.125,0.146 10 false 2 4.313,7.323 4.438,7.469 0.125,0.146 10 false 1 4.313,7.76 4.438,7.906 0.125,0.146 10 false 4 3.094,7.75 3.219,7.896 0.125,0.146 10 false 3 3.094,7.323 3.219,7.469 0.125,0.146 10 false 5 3.094,6.885 3.219,7.031 0.125,0.146 10 false 6 3.917,7 4.25,7.146 0.333,0.146 10 false VIJ3 3.917,7.406 4.25,7.552 0.333,0.146 10 false EIJ3 3.917,7.833 4.25,7.979 0.333,0.146 10 false PIJ3 6.115,6.979 6.448,7.125 0.333,0.146 10 false VIJ3 6.115,7.406 6.448,7.552 0.333,0.146 10 false EIJ3 6.115,7.844 6.448,7.99 0.333,0.146 10 false PIJ3 3.313,7.396 3.688,7.542 0.375,0.146 10 false CIJ3 3.208,8.094 3.604,8.24 0.396,0.146 10 false C161 3.208,8.24 4.438,8.552 1.229,0.313 10 false No. 3 Fuel Injector 0.75,1.823 1.073,1.969 0.323,0.146 10 false IJ1+ 0.781,0.958 1.073,1.104 0.292,0.146 10 false IJ1- 0.75,5.823 1.073,5.969 0.323,0.146 10 false IJ2+ 0.781,4.969 1.073,5.115 0.292,0.146 10 false IJ2- 0.75,6.969 1.073,7.115 0.323,0.146 10 false IJ3+ 0.781,7.844 1.073,7.99 0.292,0.146 10 false IJ3- 0.75,2.969 1.073,3.115 0.323,0.146 10 false IJ4+ 0.781,3.823 1.073,3.969 0.292,0.146 10 false IJ4- 1.281,6.781 1.406,6.927 0.125,0.146 10 false 1 1.281,1.625 1.406,1.771 0.125,0.146 10 false 1 1.281,0.76 1.406,0.906 0.125,0.146 10 false 4 1.281,2.771 1.406,2.917 0.125,0.146 10 false 2 1.281,3.635 1.406,3.781 0.125,0.146 10 false 5 1.281,4.771 1.406,4.917 0.125,0.146 10 false 6 1.281,7.646 1.406,7.792 0.125,0.146 10 false 3 1.281,5.635 1.406,5.781 0.125,0.146 10 false 3 1.146,0.958 1.542,1.104 0.396,0.146 10 false C108 1.146,1.823 1.542,1.969 0.396,0.146 10 false C108 1.146,2.979 1.542,3.125 0.396,0.146 10 false C108 1.146,3.833 1.542,3.979 0.396,0.146 10 false C108 1.146,4.979 1.542,5.125 0.396,0.146 10 false C108 1.146,5.833 1.542,5.979 0.396,0.146 10 false C108 1.146,6.99 1.542,7.135 0.396,0.146 10 false C107 1.146,7.854 1.542,8 0.396,0.146 10 false C107 5.677,1.385 6.073,1.531 0.396,0.146 10 false C166 5.677,1.823 6.073,1.969 0.396,0.146 10 false C166 5.677,2.969 6.073,3.115 0.396,0.146 10 false C166 5.677,3.396 6.073,3.542 0.396,0.146 10 false C166 5.677,3.833 6.073,3.979 0.396,0.146 10 false C166 5.677,4.969 6.073,5.115 0.396,0.146 10 false C166 5.677,5.833 6.073,5.979 0.396,0.146 10 false C166 5.677,5.406 6.073,5.552 0.396,0.146 10 false C166 5.677,6.979 6.073,7.125 0.396,0.146 10 false C166 5.677,7.844 6.073,7.99 0.396,0.146 10 false C166 5.677,7.417 6.073,7.563 0.396,0.146 10 false C166 5.677,8.74 6.073,8.885 0.396,0.146 10 false C167 5.813,1.188 5.938,1.333 0.125,0.146 10 false 6 5.771,1.615 5.969,1.76 0.198,0.146 10 false 12 5.771,0.75 5.969,0.896 0.198,0.146 10 false 18 5.771,2.771 5.969,2.917 0.198,0.146 10 false 15 5.813,3.198 5.938,3.344 0.125,0.146 10 false 3 5.813,3.635 5.938,3.781 0.125,0.146 10 false 9 5.771,4.76 5.969,4.906 0.198,0.146 10 false 17 5.813,5.198 5.938,5.344 0.125,0.146 10 false 5 5.771,5.625 5.969,5.771 0.198,0.146 10 false 11 5.771,6.781 5.969,6.927 0.198,0.146 10 false 16 5.813,7.208 5.938,7.354 0.125,0.146 10 false 4 5.771,7.635 5.969,7.781 0.198,0.146 10 false 10 5.771,8.531 5.969,8.677 0.198,0.146 10 false 22 6.083,8.729 6.458,8.875 0.375,0.146 10 false CINJ 1.156,8.5 1.521,8.677 0.365,0.177 10 false C107 1.281,8.323 1.438,8.5 0.156,0.177 10 false 4 0.729,8.51 1.104,8.667 0.375,0.156 10 false GND

CAUTION / NOTICE / HINT

CAUTION:

Make sure to perform work on high voltage circuits with the ignition switch off.


NOTICE:
·

Inspect the fuses of circuits related to this system before performing the following inspection procedure.



HINT:

Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.


PROCEDURE

1.CHECK ENGINE CRANKING CONDITION
a.

Check the engine cranking condition.

Result:
Result Proceed to
Engine does not start*1 A
Engine starts, but idling is rough*2 B
Except above C


HINT:
·

*1: Once DTC P062D is cleared, it is not stored again even when the engine does not start due to a malfunction in the injector driver (EDU).When the engine cannot be started due to a malfunction in the injector driver (EDU), the value for "Fuel Press" is higher than the value for "Target Common Rail Pressure".

·

*2: DTC P0201, P0202, P0203, P0204 and P062D are stored at this time.





A

2.INSPECT ECM

B

7.CHECK WHETHER DTC OUTPUT RECURS

C

2.INSPECT ECM
a.
A303266C03
1.365,0.333 1.781,0.604 0.417,0.271 2.823,0.302 3.24,0.573 0.417,0.271 1.083,1.698 1.365,1.073 true 1.604,1.677 1.531,1.073 true 1.865,1.698 1.635,1.083 true 1.323,1.708 1.479,1.083 true 3.042,1.708 3.26,0.979 true 0.083,0.052 0.396,0.25 0.313,0.198 10 false *a 1.417,0.385 1.792,0.583 0.375,0.198 10 false C166 2.875,0.365 3.25,0.563 0.375,0.198 10 false C164 0.979,1.729 1.167,1.917 0.188,0.188 10 false #4 1.25,1.729 1.438,1.917 0.188,0.188 10 false #3 1.563,1.729 1.75,1.917 0.188,0.188 10 false #2 1.833,1.729 2.021,1.917 0.188,0.188 10 false #1 2.948,1.74 3.177,1.927 0.229,0.188 10 false E1 2.438,2.219 3.125,2.438 0.688,0.219 10 false 2 V/DIV. 3.01,3.375 3.385,3.573 0.375,0.198 10 false GND 0.396,4.198 1.396,4.427 1,0.229 10 false 1 msec./DIV.
*a Component with harness connected
(ECM)


Check the waveform of the ECM connectors using an oscilloscope.

OK:
Tester Connection Condition Specified Condition
C166-21 (#1) - C164-6 (E1) Cranking Correct waveform is as shown
C166-22 (#2) - C164-6 (E1) Cranking Correct waveform is as shown
C166-23 (#3) - C164-6 (E1) Cranking Correct waveform is as shown
C166-24 (#4) - C164-6 (E1) Cranking Correct waveform is as shown



Result:
Proceed to
OK
NG



OK

3.CHECK TERMINAL VOLTAGE INJECTOR DRIVER POWER SOURCE

NG

6.REPLACE ECM
3.CHECK TERMINAL VOLTAGE INJECTOR DRIVER POWER SOURCE
a.
A204910C05
0.49,1.104 0.906,1.354 0.417,0.25 1.969,0.979 2.438,0.719 true 1.969,1.417 2.406,1.625 true 0.104,0.083 0.417,0.281 0.313,0.198 10 false *a 0.531,1.146 0.927,1.323 0.396,0.177 10 false C107 2.49,0.635 2.802,0.833 0.313,0.198 10 false +B 2.469,1.563 2.927,1.76 0.458,0.198 10 false GND
*a Front view of wire harness connector
(to Injector Driver)


Disconnect the injector driver connectors.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
C107-2 (+B) - C107-4 (GND) Ignition switch ON v11 to 14 V



c.

Reconnect the injector driver connectors.


Result:
Proceed to
OK
NG



OK

4.CHECK HARNESS AND CONNECTOR (INJECTOR DRIVER - ECM)

NG

13.REPAIR OR REPLACE HARNESS OR CONNECTOR
4.CHECK HARNESS AND CONNECTOR (INJECTOR DRIVER - ECM)
a.

Disconnect the injector driver connector.


b.

Disconnect the ECM connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
C109-7 (#10) - C166-21 (#1) Always Below 1 Ω
C109-3 (#20) - C166-22 (#2) Always Below 1 Ω
C109-6 (#30) - C166-23 (#3) Always Below 1 Ω
C109-4 (#40) - C166-24 (#4) Always Below 1 Ω
C109-8 (INJF) - C166-20 (INJF) Always Below 1 Ω
C109-7 (#10) or C166-21 (#1) - Body ground Always 10 kΩ or higher
C109-3 (#20) or C166-22 (#2) - Body ground Always 10 kΩ or higher
C109-6 (#30) or C166-23 (#3) - Body ground Always 10 kΩ or higher
C109-4 (#40) or C166-24 (#4) - Body ground Always 10 kΩ or higher
C109-8 (INJF) or C166-20 (INJF) - Body ground Always 10 kΩ or higher



d.

Reconnect the injector driver connector.


e.

Reconnect the ECM connector.


Result:
Proceed to
OK
NG



OK

5.REPLACE INJECTOR DRIVER

NG

13.REPAIR OR REPLACE HARNESS OR CONNECTOR
5.REPLACE INJECTOR DRIVER
a.

Replace the injector driver.

Click hereEngine / Hybrid System>1KD-FTV FUEL>INJECTOR DRIVER>REMOVAL


Result:
Proceed to
NEXT



NEXT

14.CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
6.REPLACE ECM

Result:
Proceed to
NEXT



NEXT

14.CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
7.CHECK WHETHER DTC OUTPUT RECURS
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON and turn the GTS on.


c.

Clear the DTCs.

Click hereEngine / Hybrid System>1KD-FTV ENGINE CONTROL>ECD SYSTEM(for i-ART)>DTC CHECK / CLEAR

Powertrain > Engine > Clear DTCs
50002 61

d.

Turn the ignition switch off for 30 seconds.


e.

Start the engine and idle it for 30 seconds.


f.

Enter the following menus: Powertrain / Engine / Trouble Codes.

Powertrain > Engine > Trouble Codes
50001 61

g.

Check the DTCs output on the GTS.

HINT:
·

The cylinder with the malfunctioning injector assembly can be determined based on the output DTCs.

·

If DTC P0201 is output, check the No. 1 injector assembly circuit.

·

If DTC P0202 is output, check the No. 2 injector assembly circuit.

·

If DTC P0203 is output, check the No. 3 injector assembly circuit.

·

If DTC P0204 is output, check the No. 4 injector assembly circuit.




Result:
Proceed to
NEXT



NEXT

8.INSPECT INJECTOR DRIVER
8.INSPECT INJECTOR DRIVER
a.

Disconnect the injector assembly connectors for all cylinders.

NOTICE:

If only the injector assembly connector of the malfunctioning cylinder is disconnected, the engine will start and there will be rough idling. Therefore, disconnect all injector assembly connectors before inspecting the waveform.



b.

Start the engine.


c.
A303500C01
0.5,0.75 0.917,0.99 0.417,0.24 0.5,1.083 0.917,1.323 0.417,0.24 0.5,1.417 0.917,1.656 0.417,0.24 0.5,1.75 0.917,1.99 0.417,0.24 2.01,1.167 2.5,0.813 true 2.01,1.521 2.469,1.656 true 0.094,0.031 0.406,0.229 0.313,0.198 10 false *a 0.552,0.792 0.948,1.021 0.396,0.229 10 false C159 0.552,1.125 0.948,1.354 0.396,0.229 10 false C160 0.552,1.448 0.948,1.677 0.396,0.229 10 false C161 0.542,1.792 0.938,2.021 0.396,0.229 10 false C162 2.563,0.667 3.063,1.031 0.5,0.365 10 false #1, #2, #3, #4 2.552,1.552 3.156,1.938 0.604,0.385 10 false #10, #20, #30, #40 2.208,2.229 2.927,2.448 0.719,0.219 10 false 50 V/DIV. 3.052,4.01 3.396,4.219 0.344,0.208 10 false GND 0.292,4.24 1.208,4.458 0.917,0.219 10 false 10 μsec./DIV.
*a Front view of wire harness connector
(to Fuel Injector)


Check the waveform of the injector assembly connectors using an oscilloscope.

OK:
Tester Connection Condition Specified Condition
C159-3 (#1) - C159-6 (#10) Cranking Voltage increases by 50 V or more
C160-3 (#2) - C160-6 (#20) Cranking Voltage increases by 50 V or more
C161-3 (#3) - C161-6 (#30) Cranking Voltage increases by 50 V or more
C162-3 (#4) - C162-6 (#40) Cranking Voltage increases by 50 V or more



Result:
Proceed to
OK
NG



OK

9.REPLACE INJECTOR ASSEMBLY (RELEVANT CYLINDER)

NG

11.CHECK HARNESS AND CONNECTOR (INJECTOR ASSEMBLY - INJECTOR DRIVER)
9.REPLACE INJECTOR ASSEMBLY (RELEVANT CYLINDER)
a.

Replace the injector assembly of the cylinder relevant to the DTC.

Click hereEngine / Hybrid System>1KD-FTV FUEL>FUEL INJECTOR(w/ Glow Plug Controller)>REMOVAL

NOTICE:
·

When replacing the injector assembly for a cylinder, always be sure to use a new injection pipe.

·

Follow the procedure in the repair manual and temporarily install the injection pipes and nozzle leakage pipe, and then correctly position the injector assemblies. After that, tighten parts according to the torque specifications.

·

If the installation procedure is not performed correctly, injector assemblies may become out of position, which may cause the injector assemblies to deteriorate, resulting in malfunctions.

·

If an injector assembly deteriorates and malfunctions, other problems such as knocking, rough idle, etc. may occur.

·

If an injector assembly becomes out of position, it is possible that the seal between the injector assembly and injection pipe may become incomplete, resulting in a fuel leak.




Result:
Proceed to
NEXT



NEXT

10.BLEED AIR FROM FUEL SYSTEM
10.BLEED AIR FROM FUEL SYSTEM

Result:
Proceed to
NEXT



NEXT

14.CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
11.CHECK HARNESS AND CONNECTOR (INJECTOR ASSEMBLY - INJECTOR DRIVER)
a.

Disconnect the injector assembly connectors.


b.

Disconnect the injector driver connectors.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
C159-6 (#10) - C108-1 (IJ1+) Always Below 1 Ω
C159-3 (#1) - C108-4 (IJ1-) Always Below 1 Ω
C160-6 (#20) - C108-3 (IJ2+) Always Below 1 Ω
C160-3 (#2) - C108-6 (IJ2-) Always Below 1 Ω
C161-6 (#30) - C107-1 (IJ3+) Always Below 1 Ω
C161-3 (#3) - C107-3 (IJ3-) Always Below 1 Ω
C162-6 (#40) - C108-2 (IJ4+) Always Below 1 Ω
C162-3 (#4) - C108-5 (IJ4-) Always Below 1 Ω
C159-6 (#10) or C108-1 (IJ1+) - Body ground Always 10 kΩ or higher
C159-3 (#1) or C108-4 (IJ1-) - Body ground Always 10 kΩ or higher
C160-6 (#20) or C108-3 (IJ2+) - Body ground Always 10 kΩ or higher
C160-3 (#2) or C108-6 (IJ2-) - Body ground Always 10 kΩ or higher
C161-6 (#30) or C107-1 (IJ3+) - Body ground Always 10 kΩ or higher
C161-3 (#3) or C107-3 (IJ3-) - Body ground Always 10 kΩ or higher
C162-6 (#40) or C108-2 (IJ4+) - Body ground Always 10 kΩ or higher
C162-3 (#4) or C108-5 (IJ4-) - Body ground Always 10 kΩ or higher



d.

Reconnect the injector assembly connectors.


e.

Reconnect the injector driver connectors.


Result:
Proceed to
OK
NG



OK

12.REPLACE INJECTOR DRIVER

NG

13.REPAIR OR REPLACE HARNESS OR CONNECTOR
12.REPLACE INJECTOR DRIVER
a.

Replace the injector driver.

Click hereEngine / Hybrid System>1KD-FTV FUEL>INJECTOR DRIVER>REMOVAL


Result:
Proceed to
NEXT



NEXT

14.CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
13.REPAIR OR REPLACE HARNESS OR CONNECTOR
a.

Repair or replace the harness or connector.


Result:
Proceed to
NEXT



NEXT

14.CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
14.CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
a.

Connect the GTS to the DLC3.


b.

Clear the DTCs.

Click hereEngine / Hybrid System>1KD-FTV ENGINE CONTROL>ECD SYSTEM(for i-ART)>DTC CHECK / CLEAR

Powertrain > Engine > Clear DTCs
50002 61

c.

Turn the ignition switch off for 30 seconds or more.


d.

Start the engine and idle it for 5 seconds.


e.

Enter the following menus: Powertrain / Engine / Trouble Codes.

Powertrain > Engine > Trouble Codes
50001 61

f.

Confirm that the DTC is not output again.


Result:
Proceed to
NEXT



NEXT

END