Home › Engine / Hybrid System › 2TR-FBE ENGINE CONTROL › THROTTLE BODY › 2011.10–2013.10
RM1840EF _51 Engine / Hybrid System _009571 2TR-FBE ENGINE CONTROL _0052113 THROTTLE BODY A

2TR-FBE ENGINE CONTROL  THROTTLE BODY  REMOVAL  


PROCEDURE

Hide 2.REMOVE INTAKE AIR CONNECTOR

a.

Disconnect the No. 2 ventilation hose.


b.

Disconnect the vacuum hose.


c.

Loosen the 2 hose clamps and remove the 2 bolts and disconnect the intake air connector.


Hide 3.REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY

a.

Disconnect the throttle position sensor and control motor connector.


b.

Disconnect the 2 water by-pass hoses.


c.
A086829

Remove the 2 bolts, 2 nuts and throttle body with motor.


d.

Remove the gasket from the intake manifold.