1.INSTALL VVT SENSOR (for Bank 2)
Apply a light coat of engine oil to the O-ring of the VVT sensor.
When reusing the VVT sensor, inspect the O-ring.
If the O-ring has scratches or cuts, replace the VVT sensor.
Install the VVT sensor with the bolt.
Connect the VVT sensor connector.
Connect the No. 4 and No. 5 water by-pass hoses.
2.INSTALL VVT SENSOR (for Bank 1)
Apply a light coat of engine oil to the O-ring of the VVT sensor.
When reusing the VVT sensor, inspect the O-ring.
If the O-ring has scratches or cuts, replace the VVT sensor.
Install the VVT sensor with the bolt.
Connect the VVT sensor connector.
3.INSTALL AIR CLEANER ASSEMBLY
4.CONNECT NO. 2 PCV HOSE
5.ADD ENGINE COOLANT
6.INSPECT FOR COOLANT LEAK
7.INSTALL V-BANK COVER