Home › Engine / Hybrid System › 1GR-FE ENGINE CONTROL › CAMSHAFT POSITION SENSOR › from 2012.10
RM1840EF _51 Engine / Hybrid System _009572 1GR-FE ENGINE CONTROL _0052134 CAMSHAFT POSITION SENSOR A

1GR-FE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 5.REMOVE VVT SENSOR (for Bank 1)

a.

Disconnect the VVT sensor connector.


b.
G038105

Remove the bolt and VVT sensor.


Hide 6.REMOVE VVT SENSOR (for Bank 2)

a.
A076414

Disconnect the No. 4 and No. 5 water by-pass hoses.


b.

Disconnect the VVT sensor connector.


c.
G038106

Remove the bolt and VVT sensor.