Home › Engine / Hybrid System › 1GR-FE ENGINE CONTROL › CRANKSHAFT POSITION SENSOR › from 2012.10
RM1840EF _51 Engine / Hybrid System _009572 1GR-FE ENGINE CONTROL _0052135 CRANKSHAFT POSITION SENSOR A

1GR-FE ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 2.DISCONNECT COOLER COMPRESSOR ASSEMBLY

a.
A112977

Remove the 2 bolts and disconnect the suction hose from the engine.


b.
A112978

Disconnect the cooler compressor connector.


c.

Remove the 4 bolts and disconnect the compressor from the engine.


d.

Support the cooler compressor securely.


Hide 3.REMOVE CRANK POSITION SENSOR

a.

Disconnect the crankshaft position sensor connector.


b.
A076417

Remove the bolt and crankshaft position sensor.