1.REMOVE ENGINE WIRE
2.REMOVE HEATER WATER HOSE
3.REMOVE PCV HOSE
4.REMOVE NO. 2 PCV HOSE
5.REMOVE GENERATOR ASSEMBLY
6.REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH
Remove the 4 bolts and front No. 1 engine mounting bracket RH.
7.REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH
Remove the 3 bolts and front No. 1 engine mounting bracket LH.
8.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY
Remove the 5 bolts and V-ribbed belt tensioner.
9.REMOVE INTAKE MANIFOLD
10.REMOVE OIL FILLER CAP SUB-ASSEMBLY
11.REMOVE OIL FILLER CAP HOUSING
Remove the 2 nuts, oil filler cap housing and gasket.
12.REMOVE IGNITION COIL ASSEMBLY
13.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE
Remove the engine oil level dipstick.
Remove the bolt and pull out the engine oil level dipstick guide.
Remove the O-ring from the engine oil level dipstick guide.
14.REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY
15.REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY
Remove the bolt and No. 1 idler pulley.