Home › Engine / Hybrid System › 2TR-FE FUEL › FUEL PRESSURE REGULATOR › from 2012.10
RM1840EF _51 Engine / Hybrid System _009580 2TR-FE FUEL _0052243 FUEL PRESSURE REGULATOR A

2TR-FE FUEL  FUEL PRESSURE REGULATOR  INSTALLATION  


PROCEDURE

Hide 1.INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

a.
A252065
0.74,1.688 0.854,1.688 0.854,1.688 1.625,1.385 true 0.542,1.604 0.719,1.76 0.177,0.156 10 false *1
*1 O-Ring


Apply a light coat of spindle oil or gasoline to a new O-ring and install the O-ring to the fuel pressure regulator.


b.

Install the fuel pressure regulator with the 3 bolts.

Torque:
8.5 N*m (87 kgf*cm, 75 in.*lbf)


c.

Connect the vacuum hose.


d.

Attach the wire harness clamp.


e.

Connect the throttle body connector.


f.

Connect the purge VSV connector.


Hide 4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).