1.INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY
| *1 | O-Ring |
Apply a light coat of gasoline or spindle oil to the O-ring.
Install the fuel pressure pulsation damper with the 2 bolts.
2.CONNECT NO. 1 FUEL HOSE
Connect the No. 1 fuel hose (See page Engine / Hybrid System>2TR-FBE FUEL>FUEL SYSTEM>PRECAUTION).
3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
4.INSPECT FOR FUEL LEAK (for Fuel Main Tank)