Home › Engine / Hybrid System › 2KD-FTV EMISSION CONTROL › EXHAUST GAS TEMPERATURE SENSOR › from 2012.04
RM1840EF _51 Engine / Hybrid System _009583 2KD-FTV EMISSION CONTROL _0052280 EXHAUST GAS TEMPERATURE SENSOR A

2KD-FTV EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 2.REMOVE EXHAUST GAS TEMPERATURE SENSOR

A253518

NOTICE:

If the sensor is dropped, replace it with a new one.


a.

Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor.


Hide 3.REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR

A254000

NOTICE:

If the sensor is dropped, replace it with a new one.


a.

Detach the 5 clamps.


b.

Using a 14 mm union nut wrench, remove the No. 2 exhaust gas temperature sensor.


Hide 4.REMOVE NO. 3 EXHAUST GAS TEMPERATURE SENSOR

A253520

NOTICE:

If the sensor is dropped, replace it with a new one.


a.

Using a 14 mm union nut wrench, remove the No. 3 exhaust gas temperature sensor.