Home › Engine / Hybrid System › 2KD-FTV EMISSION CONTROL › DIFFERENTIAL PRESSURE SENSOR › from 2012.04
RM1840EF _51 Engine / Hybrid System _009583 2KD-FTV EMISSION CONTROL _0052282 DIFFERENTIAL PRESSURE SENSOR A

2KD-FTV EMISSION CONTROL  DIFFERENTIAL PRESSURE SENSOR  REMOVAL  


PROCEDURE

Hide 2.REMOVE NO. 1 FRONT FLOOR HEAT INSULATOR

a.
A253529

Remove the 3 nuts and No. 1 front floor heat insulator.


Hide 3.REMOVE DIFFERENTIAL PRESSURE SENSOR ASSEMBLY

a.
A254452
0.104,0.021 0.375,0.229 0.271,0.208 10 false *A 0.094,2.458 0.365,2.667 0.271,0.208 10 false *B
*A for 4WD
*B for Pre-Runner


Disconnect the connector.


b.

for Pre-Runner:

Remove the bolt and sensor bracket.


c.
A244979

Remove the nut and differential pressure sensor from the sensor bracket.


d.
A253530

Remove the No. 6 exhaust pipe air hose and No. 7 exhaust pipe air hose from the differential pressure sensor.