Home › Engine / Hybrid System › 1KD-FTV EMISSION CONTROL › VACUUM REGULATING VALVE
RM1840EF _51 Engine / Hybrid System _009584 1KD-FTV EMISSION CONTROL _0052289 VACUUM REGULATING VALVE A

1KD-FTV EMISSION CONTROL  VACUUM REGULATING VALVE  INSTALLATION  


PROCEDURE

Hide 1.INSTALL ELECTRIC VACUUM REGULATING VALVE ASSEMBLY (for EGR)

a.

w/ EGR Cooler:

i.

Install the electric vacuum regulating valve together with the bracket with the 2 bolts.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


ii.

Connect the 4 vacuum hoses.

NOTICE:

Install the vacuum hoses so that they completely cover the pipes.



iii.

Connect the connector.



b.

w/o EGR Cooler:

i.

Install the vacuum switching valve with the bolt.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


ii.

Install the electric vacuum regulating valve together with the bracket with the 2 bolts.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


iii.

Connect the 3 vacuum hoses.


iv.

Connect the 2 connectors.



Hide 2.INSTALL NO. 1 GAS FILTER WITH GAS FILTER BRACKET (w/ EGR Cooler)

a.

Install the No. 1 gas filter with gas filter bracket with the bolt.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


b.

Connect the 2 vacuum hoses.

NOTICE:

Install the vacuum hoses so that they completely cover the pipes.