1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
|
Cap Nut |
Remove the 3 bolts, 2 cap nuts and No. 1 engine cover.
2.REMOVE INTAKE AIR TEMPERATURE SENSOR
3.REMOVE INTERCOOLER ASSEMBLY
Loosen the 2 hose clamps of the No. 1 air hose.
Loosen the 2 hose clamps of the No. 2 air hose.
Remove the 4 bolts and intercooler.
Remove the No. 2 air hose.
Remove the 4 bolts, intake air connector and gasket.