1.REMOVE INTERCOOLER ASSEMBLY WITH INTAKE AIR CONNECTOR
2.REMOVE NO. 1 ENGINE UNDER COVER
3.DRAIN ENGINE COOLANT
4.REMOVE AIR CLEANER ASSEMBLY
5.REMOVE VENTILATION PIPE
6.REMOVE COMPRESSOR INLET ELBOW
7.DISCONNECT NO. 1 AUTOMATIC TRANSMISSION OIL COOLER TUBE CLAMP (for Automatic Transmission)
Remove the bolt and disconnect the No. 1 automatic transmission oil cooler tube clamp.
8.DISCONNECT RADIATOR HOSE OUTLET
Disconnect the radiator hose outlet from the water inlet.
9.REMOVE WATER INLET
Disconnect the wire harness clamp.
Remove the 3 bolts and water inlet.
Remove the bolt and wire harness clamp bracket from the water inlet.
10.REMOVE THERMOSTAT
Remove the thermostat from the cylinder block.
Remove the gasket from the thermostat.