1.INSTALL ENGINE WATER PUMP ASSEMBLY
|
Bolt A |
|
Bolt B |
Install a new gasket and the engine water pump assembly with the 10 bolts.
2.INSTALL V-RIBBED BELT TENSIONER ASSEMBLY
|
Bolt A |
|
Bolt B |
|
Bolt C |
Temporarily install the belt tensioner with the 3 bolts.
Make sure the flanges of the bolts are contacting the tensioner surface.
Install the tensioner with the 3 bolts.
3.INSTALL NO. 1 IDLER PULLEY SUB-ASSEMBLY
| *1 | Spacer |
| *2 | Pulley |
Install the spacer and pulley with the bolt.
4.INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE
Install a new O-ring.
Install the engine oil level dipstick guide with the bolt.
Install the engine oil level dipstick.
5.INSTALL GENERATOR ASSEMBLY
6.INSTALL FAN SHROUD
7.CONNECT AIR PUMP INLET
Connect the air pump inlet to the radiator with the bolt.
8.CONNECT RADIATOR HOSE OUTLET
9.CONNECT RADIATOR HOSE INLET
10.ADD ENGINE COOLANT
11.INSPECT FOR COOLANT LEAK
12.INSTALL NO. 1 ENGINE UNDER COVER