1.REMOVE NO. 1 ENGINE UNDER COVER
2.DRAIN ENGINE COOLANT
3.DISCONNECT RADIATOR HOSE INLET
4.DISCONNECT RADIATOR HOSE OUTLET
5.DISCONNECT AIR PUMP INLET
Remove the bolt and disconnect the air pump inlet from the radiator.
6.REMOVE FAN SHROUD
7.REMOVE GENERATOR ASSEMBLY
8.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE
Remove the engine oil level dipstick.
Remove the bolt and engine oil level dipstick guide.
Cover the guide hole to prevent foreign matter from entering it.
Remove the O-ring from the engine oil level dipstick guide.
9.REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY
Remove the bolt, pulley and spacer.
10.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY
Remove the 3 bolts and tensioner.
11.REMOVE ENGINE WATER PUMP ASSEMBLY
Remove the 10 bolts, engine water pump and gasket.