Home › Engine / Hybrid System › 1GR-FE COOLING › THERMOSTAT › 2012.04–2012.10
RM1840EF _51 Engine / Hybrid System _009597 1GR-FE COOLING _0052384 THERMOSTAT A

1GR-FE COOLING  THERMOSTAT  REMOVAL  


PROCEDURE

Hide 1.REMOVE ENGINE SIDE COVER SUB-ASSEMBLY LH

Hide 2.REMOVE ENGINE SIDE COVER SUB-ASSEMBLY RH

Hide 3.REMOVE NO. 1 ENGINE UNDER COVER

Hide 6.DISCONNECT RADIATOR HOSE OUTLET

a.

Disconnect the radiator hose outlet from the water inlet housing.


Hide 7.REMOVE WATER INLET SUB-ASSEMBLY WITH THERMOSTAT

a.
A112082

Remove the 3 nuts, water inlet sub-assembly with thermostat and gasket.

HINT:

If the thermostat was not installed, cooling efficiency would be harmed. Even if the engine tends to overheat, do not remove the thermostat.