Home › Engine / Hybrid System › 1GR-FE COOLING › RADIATOR › from 2012.10
RM1840EF _51 Engine / Hybrid System _009597 1GR-FE COOLING _0052385 RADIATOR A

1GR-FE COOLING  RADIATOR  INSTALLATION  


PROCEDURE

Hide 1.INSTALL RADIATOR ASSEMBLY

a.

Install the radiator with the 4 bolts.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


b.

Attach the 4 clamps of the 2 front airbag sensors to the radiator.


c.

Connect the 2 front airbag sensor front connectors.


Hide 2.INSTALL FAN SHROUD

a.

Install the fan pulley to the water pump.


b.

Place the shroud together with the coupling fan between the radiator and engine.

NOTICE:

Be careful not to damage the radiator core.



c.

Install the fluid coupling fan to the water pump with the 4 nuts. Tighten the nuts as much as possible by hand.


d.
A110407

Attach the shroud's claws to the radiator as shown in the illustration.


e.

Install the shroud with the 2 bolts.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


f.

Connect the reservoir hose to the radiator tank upper.


g.

Install the fan and generator V belt (See page Engine / Hybrid System>1GR-FE ENGINE MECHANICAL>DRIVE BELT>INSTALLATION).


h.

Tighten the 4 nuts of the fluid coupling fan.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


i.

Install the oil reservoir with the 3 bolts.

Torque:
5.0 N*m (46 kgf*cm, 40 in.*lbf)


Hide 3.CONNECT OIL COOLER INLET HOSE

a.

Connect the oil cooler inlet hose to the radiator tank lower.


Hide 4.CONNECT OIL COOLER OUTLET HOSE

a.

Connect the oil cooler outlet hose to the radiator tank lower.


Hide 5.CONNECT RADIATOR HOSE INLET

a.

Connect the radiator hose inlet to the radiator.


Hide 6.CONNECT RADIATOR HOSE OUTLET

a.

Connect the radiator hose outlet to the radiator.


Hide 7.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 10.INSTALL RADIATOR SIDE DEFLECTOR RH

a.

Install the deflector with the 2 clips and attach the claw.


Hide 11.INSTALL RADIATOR SIDE DEFLECTOR LH

a.

Install the deflector with the 2 clips and attach the claw.


Hide 13.INSTALL NO. 1 ENGINE UNDER COVER

Hide 14.INSTALL ENGINE SIDE COVER SUB-ASSEMBLY RH

Hide 15.INSTALL ENGINE SIDE COVER SUB-ASSEMBLY LH