1.INSTALL REAR LEAF SPRING ASSEMBLY LH
Install the spring to the vehicle body.
2.INSTALL NO. 2 REAR SPRING SHACKLE SUB-ASSEMBLY
Install the spring shackle to the spring and vehicle body.
3.TEMPORARILY INSTALL SPRING SHACKLE INNER PLATE
Temporarily install the inner plate to the shackle No. 2 with the 2 washers and 2 nuts.
After stabilizing the suspension, tighten the nuts.
4.TEMPORARILY INSTALL REAR LEAF SPRING BRACKET PIN OR PIN BOLT
Temporarily install the bracket pin with the washer and nut.
Temporarily install the set bolt.
The bracket pin can be installed from either side of the spring.
After stabilizing the suspension, tighten the nut.
5.TEMPORARILY INSTALL REAR SPRING U BOLT
Temporarily install the 2 U bolts and U bolt seat with the 4 washers and 4 nuts.
When tightening the U bolts, tighten the nuts in diagonal pairs.
6.INSTALL REAR SPRING BUMPER
Install the spring bumper with the 2 bolts.
7.INSTALL REAR SHOCK ABSORBER ASSEMBLY
8.CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY
Connect the parking brake cable with the bolt.
9.STABILIZE SUSPENSION
10.TIGHTEN SPRING SHACKLE INNER PLATE
Tighten the plate nut.
11.TIGHTEN REAR LEAF SPRING BRACKET PIN NUT
Tighten the pin nut.
12.TIGHTEN REAR LEAF SPRING PIN SET BOLT
Tighten the set bolt.
13.TIGHTEN SPRING U BOLT SEAT NUT
Tighten the 4 nuts.
14.INSTALL REAR WHEEL
Install the wheel.