Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL(w/ VSC)
RM1840EF _54 Brake _009624 BRAKE SYSTEM (OTHER) _0052607 BRAKE PEDAL(w/ VSC) A

BRAKE SYSTEM (OTHER)  BRAKE PEDAL(w/ VSC)  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL BRAKE PEDAL PAD

Hide 2.INSTALL STOP LIGHT SWITCH ASSEMBLY

Hide 3.INSTALL BRAKE PEDAL SUB-ASSEMBLY

a.
C281877
0.521,2.24 0.521,1.865 false 3.229,1.813 3.344,1.813 3.344,1.813 3.344,1.073 false 2.281,2.115 2.396,2.115 2.396,2.115 2.396,1.375 false 0.917,1.469 0.917,0.854 0.917,0.854 1.063,0.854 false 1.729,1.365 1.729,0.75 1.729,0.75 1.875,0.75 false 1.115,0.74 1.427,0.938 0.313,0.198 10 false *1 1.927,0.646 2.24,0.844 0.313,0.198 10 false *2 0.469,2.271 0.781,2.469 0.313,0.198 10 false *3 2.083,2.021 2.396,2.219 0.313,0.198 10 false *3 3.042,1.719 3.354,1.917 0.313,0.198 10 false *4 0.667,2.906 0.979,3.104 0.313,0.198 10 false *5
*1 Brake Pedal
*2 Brake Pedal Shaft Collar
*3 Bush
*4 Brake Pedal Shaft
*5 Lithium soap base glycol grease


Apply a light coat of lithium soap base glycol grease to 2 new bushes, the brake pedal shaft collar and shaft.


b.

Install the brake pedal shaft collar and 2 bushes to the pedal.


c.

Install the pedal to the support with the shaft and nut.

Torque:
37 N*m (375 kgf*cm, 27 ft.*lbf)