Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL(w/o VSC)
RM1840EF _54 Brake _009624 BRAKE SYSTEM (OTHER) _0052608 BRAKE PEDAL(w/o VSC) A

BRAKE SYSTEM (OTHER)  BRAKE PEDAL(w/o VSC)  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL BRAKE PEDAL PAD

Hide 2.INSTALL STOP LIGHT SWITCH ASSEMBLY

Hide 3.INSTALL BRAKE PEDAL SUB-ASSEMBLY

a.
C281932
2.708,1.583 2.708,1.135 false 1.792,1.198 1.479,0.604 1.479,0.604 1.646,0.604 false 1.115,1.219 1.115,0.615 1.115,0.615 0.969,0.615 false 0.531,2.073 0.688,2.073 0.688,2.073 0.688,1.708 false 0.792,0.521 1.104,0.719 0.313,0.198 10 false *1 1.677,0.5 1.99,0.698 0.313,0.198 10 false *2 0.365,1.979 0.677,2.177 0.313,0.198 10 false *3 2.635,1.604 2.948,1.802 0.313,0.198 10 false *4 0.615,2.896 0.927,3.094 0.313,0.198 10 false *5
*1 Brake Pedal
*2 Brake Pedal Shaft Collar
*3 Bush
*4 Brake Pedal Shaft
*5 Lithium soap base glycol grease


Apply a light coat of lithium soap base glycol grease to 2 new bushes, the brake pedal shaft collar and shaft.


b.

Install the brake pedal shaft collar and 2 bushes to the pedal.


c.

Install the pedal to the support with the shaft and nut.

Torque:
26 N*m (265 kgf*cm, 19 ft.*lbf)