Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO RECEIVER › 2012.01–2012.04
RM1840EF _56 Audio / Visual / Telematics _009631 AUDIO / VIDEO _0052647 RADIO RECEIVER A

AUDIO / VIDEO  RADIO RECEIVER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL NO. 2 RADIO RECEIVER BRACKET (for Radio and Display Type)

a.
E225135

Install the No. 2 radio bracket to the radio receiver with the 3 screws.


Hide 2.INSTALL NO. 2 RADIO BRACKET (for Radio Receiver Type)

a.
E225134

Install the No. 2 radio bracket to the radio receiver with the 3 screws.


Hide 3.INSTALL NO. 1 RADIO RECEIVER BRACKET (for Radio and Display Type)

a.
E225133

Install the No. 1 radio bracket to the radio receiver with the 3 screws.


Hide 4.INSTALL NO. 1 RADIO BRACKET (for Radio Receiver Type)

a.
E225132

Install the No. 1 radio bracket to the radio receiver with the 3 screws.


Hide 5.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)

a.
E225131

Connect all the connectors.


b.

Install the radio and display receiver assembly with bracket with the 4 screws.


Hide 6.INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type)

a.
E225130

Connect all the connectors.


b.

Install the radio receiver assembly with bracket with the 4 screws.


Hide 7.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Airbag System)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).