Home › Audio / Visual / Telematics › AUDIO / VIDEO › AMPLIFIER ANTENNA › 2012.01–2012.04
RM1840EF _56 Audio / Visual / Telematics _009631 AUDIO / VIDEO _0052653 AMPLIFIER ANTENNA A

AUDIO / VIDEO  AMPLIFIER ANTENNA  INSTALLATION  


PROCEDURE

Hide 1.INSTALL ANTENNA WITH HOLDER ASSEMBLY (for Double Cab)

a.
B208915

Attach the 2 claws to install the with holder antenna assembly.


b.

Install the nut.

Torque:
4.5 N*m (45 kgf*cm, 39 in.*lbf)


c.

Attach the cable to the 3 clamps.

NOTICE:

Make sure the cable of the antenna passes behind pin A.



d.

Connect the connectors.

E225601
3.09,2.514 3.205,2.657 0.116,0.142 10 A


Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).