Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION ANTENNA › 2012.04–2012.10
RM1840EF _56 Audio / Visual / Telematics _009632 NAVIGATION / MULTI INFO DISPLAY _0052660 NAVIGATION ANTENNA A

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION ANTENNA  INSTALLATION  


PROCEDURE

Hide 1.INSTALL NO. 1 NAVIGATION ANTENNA CORD SUB-ASSEMBLY

a.

Attach the clamp to install the No. 1 navigation antenna cord sub-assembly, and then connect the connector.


Hide 2.INSTALL NAVIGATION ANTENNA ASSEMBLY

a.

Install the navigation antenna assembly with the 2 screws.


b.

Connect the connector and attach the clamp.


Hide 3.INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

Hide 4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).