Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › TRANSPONDER KEY AMPLIFIER › 2012.01–2012.04
RM1840EF _58 Vehicle Interior _009641 THEFT DETERRENT / KEYLESS ENTRY _0052694 TRANSPONDER KEY AMPLIFIER A

THEFT DETERRENT / KEYLESS ENTRY  TRANSPONDER KEY AMPLIFIER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL TRANSPONDER KEY AMPLIFIER

a.

Connect the connector.


b.
E225101

Align the claw of the transponder key amplifier with the upper bracket.


c.

Push in the transponder key amplifier and install it to the upper bracket.

NOTICE:

Do not push in the amplifier with excessive force as it may be damaged.



Hide 4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).