1.INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH
| *1 | Protruding Part |
| *a | Front |
| *b | 5° |
Install the seat belt with the bolt as shown in the illustration.
Do not allow the anchor part of the seat belt to overlap the protruding part of the seat adjuster.
2.INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH
| *1 | Protruding Part |
| *a | Front |
| *b | 5° |
Install the inner seat belt with the bolt as shown in the illustration.
Do not allow the anchor part of the seat belt to overlap the protruding part of the seat adjuster.
3.INSTALL REAR SEAT ASSEMBLY