1.INSTALL FRONT SEAT CUSHION COVER LH
Install the front seat cushion cover LH.
Use the same procedure to install the front seat cushion cover on the other side.
2.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH
w/ Front Passenger Seat Belt Warning System:
| *1 | Protruding Part |
Install the front seat inner belt assembly LH with the nut.
Do not allow the anchor part of the seat belt to overlap the protruding part of the seat adjuster.
Attach the wire harness to the clamp.
| *a | Front |
Attach the 2 clamps as shown in the illustration.
| *1 | Hog Ring Pliers |
Using hog ring pliers, attach the cover to front cushion frame subassembly with new hog rings.
| *1 | Protruding Part |
w/o Front Passenger Seat Belt Warning System:
Install the inner belt with the nut.
Do not allow the anchor part of the seat belt to overlap the protruding part of the seat adjuster.
3.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH
| *1 | Protruding Part |
Install the front seat inner belt assembly RH with the nut.
Do not allow the anchor part of the seat belt to overlap the protruding part of the seat adjuster.
Attach the wire harness to the clamp.
Attach the clamp.
4.INSTALL FRONT SEAT ASSEMBLY