1.INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
Align the rear No. 1 seat outer belt assembly LH positioning holes with the claws.
Install the rear No. 1 seat outer belt assembly LH with the bolt.
for bolt B
Install the rear No. 1 seat outer belt shoulder anchor with the bolt.
Attach the 2 claws to close the rear No. 1 seat outer belt shoulder anchor cover.
2.INSTALL QUARTER INSIDE TRIM BOARD LH
Attach the 7 clips, 3 guides and 4 claws to install the quarter inside trim board.
Connect the rear No. 1 seat outer belt floor anchor with the bolt.
Connect the front seat outer belt floor anchor with the bolt.
3.INSTALL FRONT DOOR OPENING TRIM LH
4.INSTALL FRONT DOOR SCUFF PLATE LH
5.INSTALL REAR SEATBACK ASSEMBLY
6.INSTALL UPPER BACK PANEL GARNISH
7.INSTALL LOWER BACK PANEL GARNISH
8.INSTALL REAR SEAT CUSHION ASSEMBLY LH (w/ Seat Cushion)
9.INSTALL REAR SEAT CUSHION ASSEMBLY RH (w/ Seat Cushion)