1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
2.REMOVE RADIATOR GRILLE
3.REMOVE FRONT BUMPER COVER
4.REMOVE ENGINE SIDE COVER SUB-ASSEMBLY LH
5.REMOVE ENGINE SIDE COVER SUB-ASSEMBLY RH
6.REMOVE FRONT BUMPER REINFORCEMENT EXTENSION LH
7.REMOVE FRONT BUMPER REINFORCEMENT EXTENSION RH
8.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
9.REMOVE RADIATOR SIDE DEFLECTOR RH
Remove the 3 clips and radiator side deflector RH.
10.REMOVE AIR CLEANER ASSEMBLY (for 1KD-FTV, 2KD-FTV)
11.REMOVE INTAKE AIR CONNECTOR AND AIR CLEANER ASSEMBLY (for TR Series Engine)
12.REMOVE AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY
Disconnect the connector.
Remove the 3 bolts and air conditioning tube and accessory assembly (air conditioning pressure sensor).
Remove the O-rings from the air conditioning tube and accessory assembly (air conditioning pressure sensor).
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.