1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
2.REMOVE FAN AND GENERATOR V BELT
3.DISCONNECT SUCTION HOSE SUB-ASSEMBLY
Remove the bolt and disconnect the suction hose from the compressor.
Remove the O-ring from the suction hose.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.
4.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
Remove the bolt and disconnect the discharge hose from the compressor.
Remove the O-ring from the discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.
5.REMOVE COOLER COMPRESSOR ASSEMBLY
Disconnect the connector.
Remove the 4 bolts and compressor.