1.REMOVE INSTRUMENT PANEL DOOR (w/o Front Passenger Airbag)
Remove the 2 screws <B>.
Detach the 8 claws and 2 guides and remove the instrument panel door.
2.REMOVE METER MOUNTING BRACKET
Remove the screw <B> and meter mounting bracket.
3.REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
Detach the 4 claws and remove the No. 2 instrument panel register.
4.REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
Use the same procedure described for the No. 2 instrument panel register.
5.REMOVE INSTRUMENT PANEL CUP HOLDER SUB-ASSEMBLY
Use the same procedure for both instrument panel cup holders.
Remove the 3 screws <B> and instrument panel cup holder.
6.REMOVE NO. 4 INSTRUMENT PANEL CUSHION
Remove the No. 4 instrument panel cushion.
7.REMOVE NO. 3 INSTRUMENT PANEL CUSHION
Remove the No. 3 instrument panel cushion.
8.REMOVE NO. 2 INSTRUMENT PANEL CUSHION
Remove the No. 2 instrument panel cushion.
9.REMOVE AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System)
10.REMOVE LIGHT CONTROL SWITCH HOLE COVER (w/ Automatic Light Control System)
Detach the 2 claws and guide and remove the light control switch hole cover.
11.REMOVE COOLER (SOLAR SENSOR) THERMISTOR (for Automatic Air Conditioning System)