This DTC is stored when a malfunction occurs in the navigation receiver assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B15AD | Navigation Processor Malfunction | Either condition is met:
·
A short to ground, short to +B or open circuit occurs in the gyro signal circuit. ·
A gyro sensor malfunction. |
Navigation receiver assembly |
| B15B0 | Display Screen Malfunction | An error in the picture circuit. | Navigation receiver assembly |
| B15B4 | CD Changer Malfunction | Either condition below is met:
·
Mechanical communication error. ·
Read malfunction. ·
Mechanical malfunction. |
Navigation receiver assembly |
| B15B7 | Bluetooth Module Malfunction | A "Bluetooth" module malfunction. | Navigation receiver assembly |
Clear the DTCs.
Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR
| Proceed to |
|---|
| NEXT |
NEXT
Check for DTCs and check if the same trouble occurs again.
No DTCs are output.
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
NG