This DTC is output when signals from the CD in the navigation receiver assembly cannot be read.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B15E1 | Media Malfunction | One of the following conditions is met:
·
An unsuitable CD is inserted. ·
The CD cannot be read. ·
The CD cannot be read because of dirt or scratches. ·
The CD cannot be read because it is inserted upside down. |
·
CD ·
Navigation receiver assembly |
Check that the CD is not deformed or cracked.
No deformation or cracks in the CD.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
If dirt in on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
Do not use a conventional record cleaner or antistatic preservative.
| Proceed to |
|---|
| NEXT |
NEXT
Clear the DTCs.
Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR
| Proceed to |
|---|
| NEXT |
NEXT
Check for DTCs and check if the same trouble code is output.
No DTC is output.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Replace the CD with another and recheck.
Clear the DTCs.
Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>SYSTEM DESCRIPTION
Recheck for DTCs and check if the same trouble occurs again.
No DTC is output.
| Proceed to |
|---|
| OK |
| NG |
OK
NG