Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › 2012.04–2012.10
RM1840EF _56 Audio / Visual / Telematics _009632 NAVIGATION / MULTI INFO DISPLAY _0052661 NAVIGATION SYSTEM J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  Speaker Circuit  


DESCRIPTION

The navigation receiver assembly sends sound signals to the speakers.

WIRING DIAGRAM

C240170
5.625,6.542 6.917,6.948 1.292,0.406 10 false Navigation Receiver Assembly 5.875,3.073 6.156,3.24 0.281,0.167 10 false FL- 5.875,2.563 6.156,2.729 0.281,0.167 10 false FL+ 5.875,1.688 6.177,1.854 0.302,0.167 10 false FR- 5.875,1.167 6.177,1.333 0.302,0.167 10 false FR+ 5.438,5.865 5.833,6.031 0.396,0.167 10 false G104 5.438,5.354 5.833,5.521 0.396,0.167 10 false G104 5.438,4.479 5.833,4.646 0.396,0.167 10 false G104 5.438,3.958 5.833,4.125 0.396,0.167 10 false G104 5.438,3.083 5.833,3.25 0.396,0.167 10 false G105 5.438,2.563 5.833,2.729 0.396,0.167 10 false G105 5.438,1.688 5.833,1.854 0.396,0.167 10 false G105 5.438,1.167 5.833,1.333 0.396,0.167 10 false G105 2.948,1.99 5.625,2.188 2.677,0.198 10 false Front No. 2 Speaker Assembly RH 2.948,3.385 5.24,3.583 2.292,0.198 10 false Front No. 2 Speaker Assembly LH 0.729,1.156 2.031,1.51 1.302,0.354 10 false Front No. 1 Speaker Assembly RH 0.729,2.563 2.031,2.938 1.302,0.375 10 false Front No. 1 Speaker Assembly LH 5.552,0.927 5.677,1.094 0.125,0.167 10 false 1 5.573,1.469 5.698,1.635 0.125,0.167 10 false 5 5.563,2.354 5.688,2.521 0.125,0.167 10 false 2 5.573,2.875 5.698,3.042 0.125,0.167 10 false 6 4.354,1.083 4.51,1.25 0.156,0.167 10 false 4 4.354,1.594 4.479,1.76 0.125,0.167 10 false 2 3.896,1.083 4.365,1.25 0.469,0.167 10 false TWR+ 3.917,1.792 4.323,1.958 0.406,0.167 10 false TWR- 3.51,1.073 3.635,1.24 0.125,0.167 10 false 3 3.51,1.604 3.635,1.771 0.125,0.167 10 false 1 3.698,1.083 3.823,1.25 0.125,0.167 10 false + 3.688,1.76 3.813,1.927 0.125,0.167 10 false - 3.896,2.479 4.365,2.646 0.469,0.167 10 false TWL+ 3.906,3.188 4.313,3.354 0.406,0.167 10 false TWL- 3.688,2.469 3.813,2.635 0.125,0.167 10 false + 3.688,3.146 3.813,3.313 0.125,0.167 10 false - 4.354,2.469 4.479,2.635 0.125,0.167 10 false 4 4.354,2.99 4.479,3.156 0.125,0.167 10 false 2 3.51,2.469 3.635,2.635 0.125,0.167 10 false 3 3.51,3 3.635,3.167 0.125,0.167 10 false 1 2.323,1.573 2.448,1.74 0.125,0.167 10 false 2 2.313,1.302 2.438,1.469 0.125,0.167 10 false 1 2.323,2.948 2.448,3.115 0.125,0.167 10 false 2 2.323,2.688 2.448,2.854 0.125,0.167 10 false 1 5.875,5.865 6.156,6.031 0.281,0.167 10 false RL- 5.885,5.333 6.167,5.5 0.281,0.167 10 false RL+ 5.875,4.479 6.177,4.646 0.302,0.167 10 false RR- 5.875,3.948 6.177,4.115 0.302,0.167 10 false RR+ 5.573,3.75 5.698,3.917 0.125,0.167 10 false 1 5.573,4.271 5.698,4.438 0.125,0.167 10 false 3 5.573,5.125 5.698,5.292 0.125,0.167 10 false 2 5.573,5.635 5.688,5.802 0.115,0.167 10 false 6 0.719,4 1.594,4.427 0.875,0.427 10 false Rear Speaker Assembly RH 0.729,5.385 1.604,5.781 0.875,0.396 10 false Rear Speaker Assembly LH 2.313,5.479 2.438,5.646 0.125,0.167 10 false 1 2.323,5.74 2.448,5.906 0.125,0.167 10 false 2 2.313,4.094 2.438,4.26 0.125,0.167 10 false 1 2.313,4.354 2.438,4.521 0.125,0.167 10 false 2 2.948,1.844 3.26,2.01 0.313,0.167 10 false H6 2.948,3.25 3.26,3.417 0.313,0.167 10 false I6 0.729,1 1.042,1.167 0.313,0.167 10 false H4 0.76,2.365 0.99,2.531 0.229,0.167 10 false I1 0.729,3.833 1.042,4 0.313,0.167 10 false J7 0.729,5.229 1.042,5.396 0.313,0.167 10 false J3

PROCEDURE

1.CHECK SPEAKER
a.

Check the malfunctioning speakers.

Result:
Result Proceed to
Malfunction in front speaker area A
Malfunction in rear speaker area B




A

2.CHECK FRONT SIDE SPEAKER

B

7.INSPECT REAR SPEAKER ASSEMBLY
2.CHECK FRONT SIDE SPEAKER
a.

Check the malfunctioning speakers.

Result:
Result Proceed to
Front No. 2 speaker assembly A
Front No. 1 speaker assembly B




A

3.INSPECT FRONT NO.2 SPEAKER ASSEMBLY

B

5.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
3.INSPECT FRONT NO.2 SPEAKER ASSEMBLY
a.

Temporarily replace the front No. 2 speaker with a new or normally functioning one.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>REMOVAL


b.

Check that the malfunction disappears.

HINT:
·

Connect all the speaker connectors to the speakers.

·

When there is a possibility that either the right or left speaker is defective, inspect by interchanging the right one with the left one.



Result:
Result Proceed to
Malfunction disappears A
Malfunction does not disappear B




A

END (FRONT NO. 2 SPEAKER ASSEMBLY IS DEFECTIVE)

B

4.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - FRONT NO. 2 SPEAKER ASSEMBLY)
4.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - FRONT NO. 2 SPEAKER ASSEMBLY)
a.

Disconnect the G105 navigation receiver assembly connector.


b.

Disconnect the H6*1 and/or I6*2 front No. 2 speaker connector.

*1: for RH

*2: for LH



c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for RH
Tester Connection Condition Specified Condition
G105-1 (FR+) - H6-4 (TWR+) Always Below 1 Ω
G105-5 (FR-) - H6-2 (TWR-)
G105-1 (FR+) - Body ground Always 10 kΩ or higher
G105-5 (FR-) - Body ground


for LH
Tester Connection Condition Specified Condition
G105-2 (FL+) - I6-4 (TWL+) Always Below 1 Ω
G105-6 (FL-) - I6-2 (TWL-)
G105-2 (FL+) - Body ground Always 10 kΩ or higher
G105-6 (FL-) - Body ground


Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

5.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
a.
E178457

Disconnect the H4*1 and/or I1*2 front No. 1 speaker assembly connector.

*1: for RH

*2: for LH



b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 4 Ω



Result:
Proceed to
OK
NG



OK

6.CHECK HARNESS AND CONNECTOR (FRONT NO. 2 SPEAKER ASSEMBLY - FRONT NO. 1 SPEAKER ASSEMBLY)

NG

REPLACE FRONT NO.1 SPEAKER ASSEMBLY

6.CHECK HARNESS AND CONNECTOR (FRONT NO. 2 SPEAKER ASSEMBLY - FRONT NO. 1 SPEAKER ASSEMBLY)

*1: for RH

*2: for LH


a.

Disconnect the H6*1 and/or I6*2 front No. 2 speaker assembly connector.


b.

Disconnect the H4*1 and/or I1*2 front No. 1 speaker assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for RH
Tester Connection Condition Specified Condition
H6-3 (+) - H4-1 Always Below 1 Ω
H6-1 (-) - H4-2
H6-3 (+) - Body ground Always 10 kΩ or higher
H6-1 (-) - Body ground

for LH
Tester Connection Condition Specified Condition
I6-3 (+) - I1-1 Always Below 1 Ω
I6-1 (-) - I1-2
I6-3 (+) - Body ground Always 10 kΩ or higher
I6-1 (-) - Body ground



Result:
Proceed to
OK
NG



OK

REPLACE FRONT NO.2 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

7.INSPECT REAR SPEAKER ASSEMBLY
a.
E178457

Disconnect the J7*1 and/or J3*2 rear speaker assembly connector.

*1: for RH

*2: for LH



b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 4 Ω



Result:
Proceed to
OK
NG



OK

8.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - REAR SPEAKER ASSEMBLY)

NG

8.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - REAR SPEAKER ASSEMBLY)
a.

Disconnect the G104 navigation receiver assembly connector.


b.

Disconnect the J7*1 and/or J3*2 rear speaker assembly connector.

*1: for RH

*2: for LH



c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for RH
Tester Connection Condition Specified Condition
G104-1 (RR+) - J7-1 Always Below 1 Ω
G104-3 (RR-) - J7-2
G104-1 (RR+) - Body ground Always 10 kΩ or higher
G104-3 (RR-) - Body ground

for LH
Tester Connection Condition Specified Condition
G104-2 (RL+) - J3-1 Always Below 1 Ω
G104-6 (RL-) - J3-2
G104-2 (RL+) - Body ground Always 10 kΩ or higher
G104-6 (RL-) - Body ground



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR