Use these procedures to troubleshoot the power window control system.
| Result |
|---|
| NEXT |
NEXT
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
| Result |
|---|
| NEXT |
NEXT
Refer to the Problem Symptoms Table.
| Result | Proceed to |
|---|---|
| Fault is not listed in problem symptoms table | A |
| Fault is listed in problem symptoms table | B |
A
B
Operation Check.
Terminals of ECU.
| Result |
|---|
| NEXT |
NEXT
| Result |
|---|
| NEXT |
NEXT
| Result |
|---|
| NEXT |
NEXT