Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM(w/o Jam Protection Function) › from 2012.10
RM1840EF _59 Vehicle Exterior _009651 WINDOW / GLASS _0052792 POWER WINDOW CONTROL SYSTEM(w/o Jam Protection Function) Y

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM(w/o Jam Protection Function)  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

HINT:

Use these procedures to troubleshoot the power window control system.


PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
Result:
Result
NEXT



NEXT

2.INSPECT BATTERY VOLTAGE
2.INSPECT BATTERY VOLTAGE
Standard voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the battery before proceeding.

Result:
Result
NEXT



NEXT

3.PROBLEM SYMPTOMS TABLE
3.PROBLEM SYMPTOMS TABLE
a.

Refer to the Problem Symptoms Table.

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW CONTROL SYSTEM(w/o Jam Protection Function)>PROBLEM SYMPTOMS TABLE

Result:
Result Proceed to
Fault is not listed in problem symptoms table A
Fault is listed in problem symptoms table B




A

4.OVERALL ANALYSIS AND TROUBLESHOOTING

B

5.REPAIR OR REPLACE
4.OVERALL ANALYSIS AND TROUBLESHOOTING

NEXT

5.REPAIR OR REPLACE
5.REPAIR OR REPLACE
Result:
Result
NEXT



NEXT

6.CONFIRMATION TEST
6.CONFIRMATION TEST
Result:
Result
NEXT



NEXT

END