Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM › from 2012.10
RM1840EF _51 Engine / Hybrid System _009608 CRUISE CONTROL _0052446 CRUISE CONTROL SYSTEM C

CRUISE CONTROL  CRUISE CONTROL SYSTEM  P0575  Cruise Control Input Circuit  


DESCRIPTION

This DTC indicates the presence of internal abnormalities in the ECM.

DTC No. Detection Item DTC Detection Condition Trouble Area
P0575 Cruise Control Input Circuit Either condition is met:
·

The cruise control input signal is abnormal.

·

The stop light switch input signal is abnormal.


ECM

CAUTION / NOTICE / HINT

NOTICE:

The ECM receives signals from each sensor to control all functions of the cruise control system. When a trouble code is stored, the fail-safe function remains on until the ignition switch is turned off.


PROCEDURE

1.CHECK FOR DTC

b.

Perform the following to make sure the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.


i.

Drive the vehicle at a speed of 40 km/h (25 mph) or more.


ii.

Turn the cruise control main switch on.


iii.

Push the cruise control main switch to -SET to activate cruise control.



c.

Check for DTCs.

Click hereEngine / Hybrid System>CRUISE CONTROL>CRUISE CONTROL SYSTEM>DTC CHECK / CLEAR

OK:

DTC P0575 is not output.



Result:
Proceed to
OK
NG



OK

NG