Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) › 2012.01–2012.04
RM1840EF _56 Audio / Visual / Telematics _009631 AUDIO / VIDEO _0052656 AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)  Speaker Circuit  


DESCRIPTION

The radio receiver assembly sends sound signals to the speakers.

WIRING DIAGRAM

C240220
5.802,6.688 6.75,7.135 0.948,0.448 10 false Radio Receiver Assembly 5.865,3.063 6.146,3.229 0.281,0.167 10 false FL- 5.865,2.563 6.146,2.729 0.281,0.167 10 false FL+ 5.51,3.083 5.75,3.25 0.24,0.167 10 false G5 5.5,2.573 5.74,2.74 0.24,0.167 10 false G5 5.865,1.667 6.302,1.917 0.438,0.25 10 false FR- 5.865,1.167 6.354,1.438 0.49,0.271 10 false FR+ 5.5,1.688 5.823,1.896 0.323,0.208 10 false G5 5.5,1.167 5.875,1.427 0.375,0.26 10 false G5 0.698,1.208 1.958,1.688 1.26,0.479 10 false Front No. 1 Speaker Assembly RH 0.698,2.615 1.948,3.083 1.25,0.469 10 false Front No. 1 Speaker Assembly LH 5.552,0.938 5.677,1.104 0.125,0.167 10 false 1 5.563,1.458 5.688,1.625 0.125,0.167 10 false 5 5.552,2.333 5.677,2.5 0.125,0.167 10 false 2 5.552,2.865 5.677,3.031 0.125,0.167 10 false 6 2.323,1.552 2.448,1.719 0.125,0.167 10 false 2 2.313,1.302 2.438,1.469 0.125,0.167 10 false 1 2.323,2.938 2.448,3.104 0.125,0.167 10 false 2 2.313,2.688 2.438,2.854 0.125,0.167 10 false 1 5.875,5.854 6.156,6.021 0.281,0.167 10 false RL- 5.875,5.354 6.156,5.521 0.281,0.167 10 false RL+ 5.51,5.865 5.719,6.031 0.208,0.167 10 false G4 5.51,5.354 5.719,5.521 0.208,0.167 10 false G4 5.875,4.469 6.177,4.635 0.302,0.167 10 false RR- 5.875,3.969 6.177,4.135 0.302,0.167 10 false RR+ 5.5,4.479 5.719,4.646 0.219,0.167 10 false G4 5.51,3.958 5.729,4.125 0.219,0.167 10 false G4 5.552,3.75 5.677,3.917 0.125,0.167 10 false 1 5.563,4.26 5.76,4.438 0.198,0.177 10 false 3 5.563,5.125 5.781,5.281 0.219,0.156 10 false 2 5.563,5.646 5.688,5.813 0.125,0.167 10 false 6 0.698,4.01 1.615,4.479 0.917,0.469 10 false Rear Speaker Assembly RH* 0.698,5.406 1.594,5.979 0.896,0.573 10 false Rear Speaker Assembly LH* 2.313,5.49 2.438,5.656 0.125,0.167 10 false 1 2.323,5.75 2.448,5.917 0.125,0.167 10 false 2 2.313,4.083 2.438,4.25 0.125,0.167 10 false 1 2.323,4.344 2.448,4.51 0.125,0.167 10 false 2 0.698,1.031 1.01,1.198 0.313,0.167 10 false H4 0.698,2.448 1.01,2.615 0.313,0.167 10 false I1 0.698,3.833 1.01,4 0.313,0.167 10 false J7 0.698,5.24 1.01,5.406 0.313,0.167 10 false J3 0.625,3.438 0.781,3.625 0.156,0.188 10 false * 0.427,7.135 1.729,7.427 1.302,0.292 10 false *: for Double Cab

PROCEDURE

1.CHECK SPEAKER
a.

Check the malfunctioning speakers.

Result:
Result Proceed to
Malfunction in front speaker area A
Malfunction in rear speaker area (for Double Cab) B




A

2.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

B

4.INSPECT REAR SPEAKER ASSEMBLY
2.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
a.
E178457

Disconnect the H4*1 and/or I1*2 front No. 1 speaker connector.

*1: for RH

*2: for LH



b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 4 Ω



Result:
Proceed to
OK
NG



OK

3.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER - FRONT NO. 1 SPEAKER)

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

3.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER - FRONT NO. 1 SPEAKER)
a.

Disconnect the G5 radio receiver assembly connector.


b.

Disconnect the H4*1 and/or I1*2 front No. 1 speaker connector.

*1: for RH

*2: for LH



c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for RH
Tester Connection Condition Specified Condition
G5-1 (FR+) - H4-1 Always Below 1 Ω
G5-5 (FR-) - H4-2
G5-1 (FR+) - Body ground Always 10 kΩ or higher
G5-5 (FR-) - Body ground

for LH
Tester Connection Condition Specified Condition
G5-2 (FL+) - I1-1 Always Below 1 Ω
G5-6 (FL-) - I1-2
G5-2 (FL+) - Body ground Always 10 kΩ or higher
G5-6 (FL-) - Body ground



Result:
Proceed to
OK
NG



OK

REPLACE RADIO RECEIVER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.INSPECT REAR SPEAKER ASSEMBLY
a.
E178457

Disconnect the J7*1 and/or J3*2 rear speaker connector.

*1: for RH

*2: for LH



b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 4 Ω



Result:
Proceed to
OK
NG



OK

5.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER - REAR SPEAKER)

NG

5.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER - REAR SPEAKER)
a.

Disconnect the G4 radio receiver assembly connector.


b.

Disconnect the J7*1 and/or J3*2 rear speaker connector.

*1: for RH

*2: for LH



c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for RH
Tester Connection Condition Specified Condition
G4-1 (RR+) - J7-1 Always Below 1 Ω
G4-3 (RR-) - J7-2
G4-1 (RR+) - Body ground Always 10 kΩ or higher
G4-3 (RR-) - Body ground

for LH
Tester Connection Condition Specified Condition
G4-2 (RL+) - J3-1 Always Below 1 Ω
G4-6 (RL-) - J3-2
G4-2 (RL+) - Body ground Always 10 kΩ or higher
G4-6 (RL-) - Body ground



Result:
Proceed to
OK
NG



OK

REPLACE RADIO RECEIVER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR