Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY(for Manual Seat) › from 2013.10
RM1840EF _58 Vehicle Interior _009647 SEAT BELT _0052732 FRONT SEAT INNER BELT ASSEMBLY(for Manual Seat) A

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY(for Manual Seat)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL FRONT SEAT CUSHION COVER LH

B342476

a.

Install the front seat cushion cover LH.

HINT:

Use the same procedure described for the RH side.



Hide 2.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH

a.

w/ Front Passenger Seat Belt Warning System:

i.

Install the front seat belt anchor plate.


ii.
B278433
2.844,1.219 2.844,1.823 true 2.771,1.844 2.958,2.021 0.188,0.177 10 false *1
*1 Protruding Part


Install the front seat inner belt assembly RH with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not overlap the anchor part of the front seat inner belt assembly RH and protruding part of the front seat cushion frame sub-assembly RH.



iii.

Attach the wire harness to the clamp.


iv.
B284014
2.948,0.865 3.188,1.104 0.24,0.24 10 false *a
*a Front


Connect the connector and attach the 2 clamps as shown in the illustration.


v.
B276730
1.759,2.386 1.971,2.547 0.212,0.161 10 *1 1.725,2.484 1.628,2.484 false 1.628,2.484 1.453,3.187 false
*1 Hog Ring Pliers


Using hog ring pliers, connect the cover to the front seat cushion frame sub-assembly RH with new hog rings.



b.

w/o Front Passenger Seat Belt Warning System:

i.

Install the front seat belt anchor plate.


ii.
B284018
2.885,1.219 2.885,1.688 true 2.823,1.75 3.083,2.01 0.26,0.26 10 false *1
*1 Protruding Part


Install the front seat inner belt assembly RH with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not overlap the anchor part of the front seat inner belt assembly RH and protruding part of the front seat cushion frame sub-assembly RH.




Hide 3.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

a.

Install the front seat belt anchor plate.


b.
B278434
0.594,1.698 0.594,1.229 true 0.531,1.74 0.844,1.896 0.313,0.156 10 false *1
*1 Protruding Part


Install the front seat inner belt assembly LH with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not overlap the anchor part of the front seat inner belt assembly LH and protruding part of the front seat cushion frame sub-assembly LH.



c.

Attach the wire harness to the clamp.


d.

Attach the clamp.