Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › from 2013.10
RM1840EF _56 Audio / Visual / Telematics _009631 AUDIO / VIDEO _0052657 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) D

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  OPERATION CHECK  


CHECK PANEL & STEERING SWITCH


HINT:
·

The radio and display receiver assembly panel switches are checked in the following procedure.

·

Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle screen.

·

Some of the following functions may also differ from the actual vehicle depending on the device settings and options.




b.
E268454

Select "Function Check/Setting" from the "Service Menu" screen.


c.
E277650

Select "Panel&Steering Switch" from the "Function Check/Setting I" screen.


d.

Panel & Steering Switch Check Mode

i.
E225786
2.269,1.407 3.085,1.407 false 0.344,1.149 1.04,1.149 false 2.888,1.063 3.085,1.063 false 0.148,1.048 0.305,1.201 0.156,0.153 10 *a 3.087,0.962 3.244,1.115 0.156,0.153 10 *b 3.087,1.327 3.244,1.48 0.156,0.153 10 *c

Operate each switch and check that the number of switches pushed and the switch conditions are correctly displayed.

Screen Description
Display Content
*a: Switch condition "Pushed" is displayed when any switch is pushed
*b: Number of pushed switch
·

Number of switches pushed at once is displayed

·

If more than 3 switches are pushed at once, "More than 3" is displayed


*c: Rotary switch direction Direction of rotary switch is displayed

NOTICE:

When the return switch on the remote operation board is pressed and held for 3 seconds or more, diagnostic mode will be canceled.





CHECK TOUCH SWITCH


HINT:
·

The touch switches on the screen are checked in the following procedure.

·

Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle screen.




b.
E268454

Select "Function Check/Setting" from the "Service Menu" screen.


c.
E277651

Select "Touch Switch" from the "Function Check/Setting I" screen.


d.
E176521

Touch Switch Check

i.

Touch the display anywhere in the open area to perform the check when the "Touch Switch Check" screen is displayed.

HINT:
·

A "+" mark is displayed where the display is touched.

·

The "+" mark remains on the display even after the finger is removed.






CHECK MICROPHONE


HINT:
·

The microphone and microphone input level are checked in the following procedure.

·

Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle screen.




b.
E268454

Select "Function Check/Setting" from the "Service Menu" screen.


c.
E277652

Select "Mic&Voice Recognition" from the "Function Check/Setting I" screen.


d.

Microphone and Voice Recognition Check

i.
E268457
2.281,0.792 2.51,0.229 2.51,0.229 2.323,0.229 true 1.719,1.844 1.719,1.417 false 2.063,1.844 2.063,1.417 false 2.417,1.844 2.417,1.417 false 3,1.354 2.844,1.354 false 2.146,0.125 2.375,0.344 0.229,0.219 10 false *a 3.031,1.25 3.26,1.469 0.229,0.219 10 false *e 1.99,1.854 2.219,2.073 0.229,0.219 10 false *c 1.646,1.844 1.875,2.063 0.229,0.219 10 false *b 2.323,1.854 2.552,2.073 0.229,0.219 10 false *d

When speaking into the microphone, check that the microphone input level meter changes according to the input level.

Screen Description
Display Content
*a: Microphone input level meter Monitors the microphone input level every 0.1 seconds and displays the results in 8 different levels
*b: Recording switch* Starts recording
*c: Stop switch* Stops recording and playing
*d: Play switch* Plays the recorded voice
*e: Recording indicator* Comes on while recording

*: w/ Recording Function





CHECK VEHICLE SIGNAL


HINT:
·

Vehicle signals received by the radio and display receiver assembly are checked in the following procedure.

·

Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle screen.




b.
E268454

Select "Function Check/Setting" from the "Service Menu" screen.


c.
E277653

Select "Vehicle Signal" from the "Function Check/Setting I" screen.


d.

Vehicle Signal Check Mode

i.
E225776

When the "Vehicle Signal Check Mode" screen is displayed, check all the vehicle signal conditions.

Screen Description
Display Content
Battery Monitors the microphone input level every 0.1 seconds and displays the results in 8 different levels
IG Starts recording
PKB Stops recording and playing
REV Plays the recorded voice
SPEED Comes on while recording
TAIL Tail signal (headlight dimer switch assembly) ON/OFF state is displayed
ADIM/TCAN Tail signal (headlight dimmer switch assembly) ON/OFF state is displayed

·

Only items sending vehicle signals will be displayed.

·

This screen displays vehicle signals received by the radio and display receiver assembly.

·

This screen is updated once per second.





CHECK HF VOICE QUALITY SETTING


HINT:
·

The handsfree volume of a "Bluetooth" compatible phone can be adjusted using the following procedure.

·

Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle screen.




b.
E268454

Select "Function Check/Setting" from the "Service Menu" screen.


c.
E277654

Select "HF Voice Quality Setting" from the "Function Check/Setting I" screen.


d.

Hands-Free Voice Quality Setting

NOTICE:

Sound quality may deteriorate when the receive voice level is changed more than necessary. For this reason, check that the received voice quality is still acceptable after changing this setting.


i.
E273710
1.802,1.917 1.802,1.635 false 2.875,1.01 3.167,1.01 false 2.844,1.552 3.167,1.552 false 3.198,0.927 3.427,1.094 0.229,0.167 10 false *a 3.198,1.469 3.417,1.635 0.219,0.167 10 false *b 1.719,1.938 1.969,2.104 0.25,0.167 10 false *c
*a Numeric Keypad
*b Setting Button
*c Reset Button


If necessary, refer to the table below to adjust the voice quality type with the numeric keypad.


ii.

When adjusting the settings, use the number pad on the screen to input the voice quality type according to the table.

Settings
Parameter Target Phenomenon Voice Quality Type Positive Effect of Changing Voice Quality Negative Effect of Changing Voice Quality
A
(Noise)
The other party hears background noise when listening to your voice 1000 The amount of background noise the other party hears when listening to your voice is reduced The volume of voice the other party hears when listening to your voice may temporarily drop
B
(Noise)
The other party hears a lot of background noise when listening to your voice 2000 The amount of background noise the other party hears when listening to your voice is sharply reduced The volume of voice the other party hears when listening to your voice may temporarily drop
C
(Echo)
The other party hears weak echoes 0100 The amount of echo is reduced (low level) Sound quality of the other party deteriorates (low level)
D
(Echo)
The other party hears strong echoes 0200 The amount of echo is reduced (high level) Sound quality of the other party deteriorates (high level)

Settings (When Multiple Phenomenon Occurred)
Parameter Target Phenomenon Voice Quality Type Positive Effect of Changing Voice Quality Negative Effect of Changing Voice Quality
A+C The other party hears background noise and weak echoes when listening to your voice 1100
·

The amount of background noise the other party hears when listening to your voice is reduced

·

The amount of echo is reduced (low level)


·

The volume of voice may drop temporarily

·

Sound quality of the other party deteriorates (low level)


A+D The other party hears background noise and strong echoes when listening to your voice 1200
·

The amount of background noise the other party hears when listening to your voice is reduced

·

The amount of echo is reduced (high level)


·

The volume of voice may drop temporarily

·

Sound quality of the other party deteriorates (high level)


B+C The other party hears a lot of background noise and weak echoes when listening to your voice 2100
·

The amount of background noise the other party hears when listening to your voice is sharply reduced

·

The amount of echo is reduced (low level)


·

The volume of voice may drop temporarily

·

Sound quality of the other party deteriorates (low level)


B+D The other party hears a lot of background noise and strong echoes when listening to your voice 2200
·

The amount of background noise the other party hears when listening to your voice is sharply reduced

·

The amount of echo is reduced (high level)


·

The volume of voice may drop temporarily

·

Sound quality of the other party deteriorates (high level)



HINT:
·

The default value is "0000".

·

Settings will be applied when the setting button is selected.

·

If voice quality type values that are not in the table are input, the setting will not be applied and a positive effect may not be gained.

·

If the quality of phone calls decreases due to the changed settings, return the settings to "0000" by pressing the "INIT" switch.






CHECK SPEAKER


HINT:
·

This function is used when checking the speaker wiring and whether the speakers are functioning properly.

·

Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle screen.



a.

Turn audio mode on and play any audio source.

HINT:

This audio source will be used for the speaker check.




c.
E268484

Select "Failure Diagnosis" from the "Service Menu" screen.


d.
E278176

Select "System Check" from the "Failure Diagnosis" screen.


e.
E273721

Select "SPCheck ON" from the "System Check Mode" screen.


f.

Check the speaker wiring and check that the speakers are functioning properly.

HINT:
·

Check that each speaker outputs sound from the selected audio source properly.

·

"SPCheck OFF" is displayed during the speaker check.

·

Sound can be heard from the speakers around the vehicle in order beginning from a speaker on the front side.




g.

Sound stops when any of the following conditions are met:

i.

The "SPCheck OFF" switch is pressed.


ii.

The ignition switch is turned off.


iii.

Diagnostic mode is turned off.


iv.

The screen is changed to another screen.


v.

Audio mode is turned off.