GLOW PLUG (w/ Glow Plug Controller) > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE ELECTRIC EGR CONTROL VALVE ASSEMBLY |
| 4. REMOVE GLOW CONNECTOR BRACKET |
![]() |
Disconnect the No. 1 glow plug connector and detach the clamp.
![]() |
Remove the bolt and glow connector bracket.
| 5. REMOVE NO. 2 MANIFOLD STAY |
![]() |
Remove the bolt and No. 2 manifold stay.
| 6. REMOVE NO. 1 GLOW PLUG CONNECTOR |
![]() |
Remove the 4 screw grommets.
![]() |
Remove the 4 nuts and No. 1 glow plug connector.
| 7. REMOVE NO. 1 INTAKE MANIFOLD INSULATOR |
![]() |
| 8. REMOVE GLOW PLUG |
![]() |
Using a 12 mm deep socket wrench, remove the 4 glow plugs.