Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

NAVIGATION SYSTEM > Display does not Dim when Light Control Switch is Turned ON


INSPECTION PROCEDURE

1.CHECK VEHICLE SIGNAL


    E234527E01
  1. Display the "Connection Status" screen (Click here).

  1. Check that the display changes between On and Off according to the light control switch operation.

    OK:
    Light Control Switch Condition
    Display Condition
    TAIL or HEAD
    On
    OFF
    Off

    HINT:
    The display is updated once per second. It is normal for the display to lag behind the actual switch operation.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)