Home › ENGINE ยท 2TR-FBE › FUEL › FUEL PRESSURE PULSATION DAMPER

FUEL PRESSURE PULSATION DAMPER > REMOVAL

for Preparation Click here



1. DISCHARGE FUEL SYSTEM PRESSURE
(Click here)


2. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).



3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



4. DISCONNECT NO. 1 FUEL HOSE


    A239218E01
  1. Disconnect the No. 1 fuel hose (Click here).



5. REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY


    A239217
  1. Remove the 2 bolts and fuel pressure pulsation damper.