Home › ENGINE ยท 2TR-FBE › ENGINE CONTROL SYSTEM › ENGINE COOLANT TEMPERATURE SENSOR

ENGINE COOLANT TEMPERATURE SENSOR > REMOVAL

for Preparation Click here



1. REMOVE THROTTLE BODY
(Click here)


2. REMOVE STARTER ASSEMBLY


    G039103E03
  1. Disconnect the starter connector.

  1. Disconnect the terminal cap.

  1. Remove the nut and disconnect the starter wire.

  1. Remove the 2 bolts and starter.



3. REMOVE INTAKE MANIFOLD


    A237732
  1. Disconnect the vacuum hose and fuel hose.

  1. Disconnect the purge line hose and purge VSV connector.

  1. Remove the 5 bolts, 2 nuts, intake manifold and gasket.



4. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    A111697
  1. Disconnect the sensor connector.

  1. Remove the sensor.

  1. Remove the gasket from the sensor.