KNOCK SENSOR > REMOVAL |
| 1. REMOVE THROTTLE BODY |
| 2. REMOVE STARTER ASSEMBLY |
![]() |
Disconnect the starter connector.
Disconnect the terminal cap.
Remove the nut and disconnect the starter wire.
Remove the 2 bolts and starter.
| 3. REMOVE INTAKE MANIFOLD |
![]() |
Disconnect the vacuum hose and fuel hose.
Disconnect the purge line hose and purge VSV connector.
Remove the 5 bolts, 2 nuts, intake manifold and gasket.
| 4. REMOVE KNOCK SENSOR |
![]() |
Disconnect the sensor connector.
Remove the bolt and sensor.