Home › ENGINE ยท 2TR-FBE › ENGINE CONTROL SYSTEM › KNOCK SENSOR

KNOCK SENSOR > REMOVAL

for Preparation Click here



1. REMOVE THROTTLE BODY
(Click here)


2. REMOVE STARTER ASSEMBLY


    G039103E03
  1. Disconnect the starter connector.

  1. Disconnect the terminal cap.

  1. Remove the nut and disconnect the starter wire.

  1. Remove the 2 bolts and starter.



3. REMOVE INTAKE MANIFOLD


    A237732
  1. Disconnect the vacuum hose and fuel hose.

  1. Disconnect the purge line hose and purge VSV connector.

  1. Remove the 5 bolts, 2 nuts, intake manifold and gasket.



4. REMOVE KNOCK SENSOR


    A099414E01
  1. Disconnect the sensor connector.

  1. Remove the bolt and sensor.