Home › ENGINE ยท 2TR-FBE › FUEL › FUEL PRESSURE REGULATOR

FUEL PRESSURE REGULATOR > REMOVAL

for Preparation Click here



1. DISCHARGE FUEL SYSTEM PRESSURE
(Click here)


2. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).



3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



4. REMOVE INTAKE AIR CONNECTOR
  1. Disconnect the No. 2 ventilation hose.

  1. Disconnect the vacuum hose.

  1. Loosen the 2 hose clamps and remove the 2 bolts and disconnect the intake air connector.



5. REMOVE FUEL PRESSURE REGULATOR


    A237743
  1. Disconnect the vacuum hose.

  1. Disconnect the No. 2 fuel hose.

    HINT:
    Put a suitable container, cloth or equivalent under the fuel delivery pipe.

  1. Remove the 3 bolts and fuel pressure regulator.

  1. Remove the O-ring from the fuel pressure regulator.